670954

Bestron ALX260CARB - 12V Manual

21
Zoom out
Zoom in
Previous page
1/24
Next page
Instruction manual
21
English
OPERATION - Fitting the crevice tool and nozzle with brush
1. Hold the car vacuum cleaner by the handle. Make
sure you cannot accidentally switch on the appliance.
2. Slide the small nozzle into the nozzle of the
car vacuum cleaner’s dust/liquid receptacle.
3. If so required, slide the nozzle with the brush onto
the crevice tool.
OPERATION - Fitting the nozzle with rubber attachement
1. Hold the car vacuum cleaner by the handle. Make
sure you cannot accidentally switch on the appliance.
2. Slide the nozzle with the rubber attachement into the
nozzle of the car vacuum cleaner’s dust/liquid receptacle.
CLEANING AND MAINTENANCE - Cleaning the exterior
Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics. Make sure no
moisture gets into the car vacuum cleaner.
• Never immerse the appliance, charging stand or adapter in water.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
CLEANING AND MAINTENANCE - Removing the dust from the receptacle
Remove the dust from the receptacle at periodic intervals.
1. Press the release button (1) on the upperside of the appliance, and remove the receptacle from the
motor housing.
2. Remove the filter holder (11) from the receptacle.
3. Clean the filter, if necessary (see ‘Cleaning the filter’).
4. Dispose of the dust from the receptacle in a dustbin.
5. Return the filter holder to the receptacle.
6. Fit the receptacle to the motor housing.
CLEANING AND MAINTENANCE - Removing liquid from the receptacle
You must always empty any liquid in the receptacle before storing the car vacuum cleaner.
1. Press the release button (1) on the upperside of the appliance, and remove the receptacle from the
motor housing.
Do not hold the receptacle vertically upright, to prevent liquid from leaking from the receptacle.
2. Remove the filter holder (11) from the receptacle.
3. Clean the filter, if necessary (see ‘Cleaning the filter’).
4. Empty the liquid in the receptacle in a washbasin.
5. Clean the interior of the receptacle and the filter holder with water and a cleaner suitable for plastic,
and dry thoroughly.
6. Return the filter holder to the receptacle.
7. Fit the receptacle to the motor housing.
CLEANING AND MAINTENANCE - Cleaning the filter
You will need to clean the filter when it is severely fouled. Failure to do so can result in reduced suction,
and may even cause damage to the motor.
1. Remove filter (11) from the receptacle (10).
2. Rinse the filter in lukewarm water.
3. Allow the filter to dry thoroughly.
5. Return the filter holder to the receptacle.
6. Fit the receptacle to the motor housing.
• Do not clean the filter in a dishwasher.
• Do not use appliances such as a hairdryer to dry the filter.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron ALX260CARB - 12V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron ALX260CARB - 12V in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info