800862

Bestron ADWM1000P Manual

10
Zoom out
Zoom in
Previous page
1/24
Next page
OPERATION
The appliance is intended only for domestic use, not for professional use.
The following description is associated with the image on page 2:
1. Unpack the device and remove all packaging parts.
2. Clean the baking tray before using for the rst time (see ‘Cleaning and maintenance’).
3. Plug in the power cord and let the wa󰀪e maker heat for 10 minutes. This will remove any packaging
odor from the device.
PLEASE NOTE:
• The rst time you use the appliance, it may produce slight smoke and a specic odour. This is normal
and will disappear on its own. Ensure su󰀩cient ventilation.
• Keep birds away from the appliance when the appliance is in operation. When heating the non-stick
coating on the baking tray, a substance can be released that is a nuisance to birds.
Preheating
1. Place the appliance on a at, level surface.
2. This appliance must be connected to an earthed socket.
3. Plug the power cord into the wall outlet. The indicator lights come on and the appliance heats up.
4. Wait for the green indicator light to turn o󰀨. The baking trays are then at the right temperature and the
wa󰀪e maker is ready for use.
Baking wa󰀪es
1. Prepare the wa󰀪e dough according to the recipe on the dough packaging.
2. Preheat the appliance as described in ‘Preheating’.
3. Grease both baking trays. Use a brush to spread the oil or butter.
4. Fill the bottom baking tray with dough/batter. Prevent the dough from running over the edge of the
baking tray. Close the lid.
5. Bake the wa󰀪es until they are the desired colour.
6. Open the appliance when the wa󰀪es are ready.
7. Carefully remove the wa󰀪es with a heat resistant wooden or plastic spatula so as not to damage the
non-stick coating.
8. When you have nished baking wa󰀪es, unplug the appliance and open the appliance to allow the
baking trays to cool.
PLEASE NOTE:
• Normal cooking time is approximately 3 - 5 minutes. This depends on the dough used and your
personal taste. Leave the appliance closed while baking because opening it during use can adversely
a󰀨ect the appearance of the wa󰀪es.
• Do not use sharp forks or knives!
CLEANING AND MAINTENANCE
Clean the wa󰀪e maker after each use.
1. Disconnect from mains power supply and let the appliance cool down.
2. Clean the wa󰀪e iron with a damp cloth. If necessary, you can clean the wa󰀪e iron with soapy water.
Do not allow liquid to enter the device.
3. Dry the device thoroughly after cleaning.
4. Store the wa󰀪e maker.
PLEASE NOTE:
• Do not use aggressive or abrasive cleaning agents or sharp objects (such as knives or hard brushes)
when cleaning.
SERVICE
If an unexpected problem occurs, please visit www.bestron.com/service for assistance.
1. Housing
2. Baking trays
3. Indicator light “heating up”
4. Indicator light “switched on”
5. Handle
10
EN
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron ADWM1000P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron ADWM1000P in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 1.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info