546716
17
Zoom out
Zoom in
Previous page
1/30
Next page
Instruction manual
17
English
USE - Location
Place the convector heater on a stable surface in the room to be heated.
The heater heats the air flowing past the appliance. For this reason, the best
place for the convector heater is 20 to 25 cm in front of a window. An air flow
is generated by the cooling of air passing the window and the heating of air
passing the convector heater; see figure 3.
Make sure that air can pass through the heater easily. For this reason
the top and bottom of the convector heater must always remain
unobstructed. Never hang clothing, etc., over the convector heater to dry.
The heat produced by the heater could readily result in a fire.
Figure 3
USE
1. Rotate the thermostat dial to “O”.
2. Make sure the function dial is set to “0”.
3. Insert the plug into the plug socket.
4. Use the function dial to select the desired setting.
Button a = 1250Watt
Button b = 750Watt
Button a+b = 2000Watt
5. Rotate the thermostat dial towards the “MAX” setting. The appliance will turn itself on, a click will be
heard and the On/Off indicator light will be lit. The temperature is increased by turning the thermostat
dial further.
6. Switch on the turbo fan if you wish to distribute the heat through the room quickly.
You can also use the turbo fan to distribute cold air. By only switching on the turbo button.
7. Switch the appliance off after use by turning the function dial to the “0” position and remove the plug
from the wall socket. Set the thermostat dial to the “O” setting again.
To find the ideal thermostat setting, rotate the thermostat dial clockwise as far as possible. Once the
room has reached the desired temperature, slowly rotate the dial anticlockwise until a click is heard.
The appliance will then turn itself off. The temperature control will ensure that the room remains at the
set temperature.
Never cover the air inlet or the air outlet.
The thermostat switches off the heating element and the turbo fan once the desired temperature
has been reached.
The convector heater is fitted with an overheating safeguard. The convector heater will be switched
off automatically if the appliance’s internal temperature becomes too high. The overheating
safeguard will be disabled once the appliance has cooled down sufficiently and the convector
heater can then be used again.
CLEANING AND MAINTENANCE
Remove the plug from the plug socket and allow the convector heater to cool down.
Clean the convector heater with a damp cloth. If necessary, use a little washing-up liquid to clean the
convector heater. Make sure no moisture enters the convector heater.
Dry the appliance thoroughly after cleaning.
Never immerse the appliance in water.
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the appliance.
THE ENVIRONMENT
Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to
the symbols on the product, the user’s instructions or the packaging.
The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
Contact your municipality for the address of the appropriate collection point in your neighbourhood.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron ACV2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron ACV2000 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info