546830
20
Zoom out
Zoom in
Previous page
1/36
Next page
Users instructions
20
English
OPERATION - Using for the first time
Before using the iron for the first time begin by ironing a piece of old fabric to verify that the soleplate and
water reservoir are clean. Repeat this when the iron has not been used for a period of time.
The appliance may emit a little smoke and a characteristic smell when you switch it on for the first time.
This is normal, and will soon stop. Make sure the appliance has sufficient ventilation.
OPERATION - Selecting the mains voltage
1. Verify that the mains voltage is in agreement with one of the two voltages
specified on the appliance’s type plate. Do not use the appliance if this is
not the case.
2. Set the mains-voltage switch to the required position: 115 Volt or 230 Volt
(see figure 2).
Figure 2
Selecting the mains voltage
OPERATION - Filling the reservoir with water
1. Fold the handle outwards. When folding the handle outwards, a
clicking noise must be heard to indicate that the handle is secure.
2. Use one hand to move the slide backwards and use your other
hand to carefully remove the water reservoir (see figure 3).
3. Remove the plug from the water reservoir and fill the reservoir
with clean tap water.
4. Fit the plug to the water reservoir.
5. Dry the exterior of the water reservoir with a dry cloth.
6. Place the water reservoir back on the iron. When replacing the
reservoir, a clicking noise must be heard to indicate that the
reservoir is secure.
The plug must be removed from the socket-outlet before the
water reservoir is filled with water.
Figure 3 Removing the water reservoir
OPERATION - Dry ironing
1. Insert the plug into the plug socket.
2. Turn the temperature-control dial to the required position (see ‘Ironing instructions’).
3. Stand the iron upright.
4. Iron the fabric by sliding the iron over the fabric. While you are ironing the heating element will
automatically switch on and o. to maintain the soleplate at the set temperature.
5. When you have .nished ironing turn the temperature-control dial to the lowest position, remove the
plug from the wall socket, and stand the iron upright to allow it to cool.
OPERATION - Steam ironing
The water reservoir must not be opened whilst you are ironing!
1. Fill the water reservoir with water (see ‘Filling the reservoir with water’).
2. Insert the plug into the plug socket.
3. Turn the temperature-control dial to the required position within the
‘steam range’ (see ‘Ironing instructions’).
4. Stand the iron upright.
5. Iron the fabric by sliding the iron over the fabric.
6. While you are ironing you can press the steam button .rmly to give a shot
of steam (see Figure 4).
7. When you have .nished ironing turn the temperature-control dial to the
lowest position, remove the plug from the wall socket, and stand the iron
upright to allow it to cool.
Figure 4 Using a steam shot
115V
230V
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron ACL258 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron ACL258 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info