Manual Bestron AATM800STE (page 13 of 32) (English, German, Dutch, French, Italian, Swedish, Spanish)

800837

Zoom out

Zoom in

1/32

OPERATION

The appliance is intended only for domestic use, not for professional use.

The following description is associated with the image on page 2:

1. Unpack the device and remove all packaging parts.

2. Clean the jug kettle before using for the rst time (see ‘Cleaning and maintenance’).

Using the device as a kettle

1. Remove the lid (1), fill the glass jug (3) with the desired amount of water, replace the lid and place the

glass jug on the base (4) and plug in the mains plug.

2. This appliance must be connected to an earthed mains socket.

3. If necessary, set the desired temperature with the Temperature + / - Buttons (11) and then press the

On/Off Button (10).

When it reaches the set temperature, the device emits 3 signals in quick succession. You can now take

the glass jug by the handle (5) o󰀨 the base and pour out the hot water. After use, remove the plug from the

wall socket.

WARNING:

The hot water or hot parts can cause severe burns. Always pick up the glass jug by the handle.

Using the appliance as a tea maker

1. Remove the lid, pull the tea basket, using the small ring, from the lift and fill the glass jug with the

desired amount of water.

2. Open the tea basket and fill it with the desired amount of loose-leaf tea (or a tea bag). The amount

depends on your personal preference (approx. 1 scoop of loose-leaf tea per 250 ml of water). Close

the tea basket again and place it back on the lift. Close the lid on the glass jug, place the glass jug on

the base and plug in the mains plug.

3. Now select one of the pre-sets with the Tea Type Selection Button (8). Each pre-set has its own

temperature and infusion time.

4. Now press the On/Off Button (10).

When it reaches the pre-set temperature, the tea basket will automatically sink into the hot water.

When it reaches the pre-set infusion time, the tea basket will rise again, and the device will give 3 signals

in quick succession. You can now take the glass jug by the handle o󰀨 the base and pour the tea. After use,

remove the plug from the wall socket.

You can deviate from the pre-sets by setting your own temperature and/or your own infusion time. To do this,

use the Temperature + / - Buttons and the Infusion Time + / - Buttons.

Using the auto start function

1. Press and hold the Auto Start Button (6) until the display starts flashing.

2. Use the Temperature + / - Buttons to set the current time.

3. Use the Infusion Time + / - Buttons to set the delay time in 30-minute increments. You can set the

device to start automatically from 30 minutes to 10 hours.

4. Confirm with the On/Off Button.

WARNING:

If the auto-start function is used, you must ll the appliance with su󰀩cient water and tea beforehand.

Using the keep warm function

Press the Keep Warm Button (7) before, during or after the brewing process to ensure that the tea is kept

warm for a maximum of 60 minutes.

Overheating protection

The device is equipped with an overheating safety feature. This switches the appliance o󰀨 automatically if it

is switched on without or with too little water. The device must then cool down for at least 10 minutes before

it can be used again.

1. Lid

2. Limescale lter

3. Glass jug

4. Base

5. Handle

6. Auto Start Button

7. Keep Warm Button

8. Tea Type Selection Button

9. Tea Strength Selection Button

10. On/O󰀨 Button

11. Temperature + / - Buttons

12. Infusion Time + / - Buttons

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bestron AATM800STE in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 1.57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bestron AATM800STE Manual

Product: