546557
23
Zoom out
Zoom in
Previous page
1/40
Next page
Users instructions
23
English
7. Press the button on the telescopic tubes and keep it pressed in; you
can then extend or retract the tubes to the required length. See Figure 3b.
8. Press the foot button on the nozzle to set the combi nozzle for use on
hard or soft surfaces, see Figure 3c. For use on hard surfaces, press the
foot button on the combi nozzle to extend the brushes. Lift the button for
use on soft surfaces.
Note For wooden flors we reccomend you to use the special hard
floor brush
Figure 3
ACCESSORIES
This vacuum cleaner is supplied with 2 accessories (16):
a combined accessory
- with a crevice tool with a narrow nozzle, which you can use to
clean radiators, window frames, crevices, small openings,
and similar;
- with a dusting brush, which you can use to clean delicate or
irregular surfaces, furniture, Venetian blinds, and similar.
a furniture nozzle Figure 4
OPERATION - Storage after use
1. Remove the plug from the wall socket.
2. Press the rewind button (13) and keep it pressed in; the
power cord will automatically rewind onto the reel.
Guide the power cord whilst it rewinds onto the reel,
since otherwise the cord could become tangled or the
plug could strike the back of the appliance. Take hold
of the power cord near the mark, and allow it to gently
slide through your fingers back into the appliance, see
Figure 5. Figure 5
3. Stand the vacuum cleaner upright. Retract the telescopic tube completely. An attachment slot for
the telescopic tube is fitted to the bottom of the vacuum cleaner, next to the front castor (12)
(see Figure 6). Slide the bottom of the accessory bracket into the slot.
An attachment slot for the combi nozzle is fitted to
the back of the vacuum cleaner. Slide the bottom of
the combi nozzle into the slot
This avoids the need to dismantle the vacuum
cleaner after use; you can store the assembled
appliance and retrieve it again quickly when you
need it.
Figure 6
CLEANING AND MAINTENANCE
1. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics. Make sure no
moisture gets into the appliance.
2. Over the course of time dust and dirt can accumulate around the wheel axles, thereby preventing the
wheels from turning easily. Consequently they should be kept clean.
Never immerse the appliance, plug or power cord in water.
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
CLEANING AND MAINTENANCE - Changing the dust bag
1. Change the dust bag immediately once the ‘dust bag full’ indicator (15) turns red, see Figure 7.
It is possible that the indicator turns red whilst the dust bag is not yet full. If so, then the nozzle, hose or
tubes may be blocked. These will then need to be cleaned.
ab
c
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bestron A2300E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bestron A2300E in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info