Manual BeSafe iZi Turn i-size (page 4 of 103) (All languages)

768213

Zoom out

Zoom in

1/103

12 13

Guarantee

• Should this product prove faulty within 24 months of purchase due to

materials or manufacturing fault, except covers and harness straps,

please return it to the original place of purchase.

• The guarantee is only valid when you use your seat appropriately and

with care. Please contact your retailer, they will decide if the seat will

be returned to the manufacturer for repair. Replacement or return

cannot be claimed. The guarantee is not extended through repair.

• The guarantee expires: when there is no receipt, when defects are

caused by incorrect and improper use, when defects are caused by

abuse, misuse or negligence.

• The child seat MUST NOT be installed in a front passenger

seat WITH AN ACTIVATED AIRBAG.

• The ﬂoor support must always be used. Make sure that the

ﬂoor support is fully pushed down and that the seat is positioned

horizontal with the spirit level in the middle.

• Never drive with a child in the seat if the seat is rotated to the side.

• Make sure the indicators are green before you drive.

! Warning: potential misuse

• Do take care when you remove the cover, as re-ﬁtting the cover is

done in reverse.

• The cover of the headrest can be taken o separately by

disconnecting the beads at the back and pulling o the fabric

towards the front.

Removing and reﬁtting the cover

1. Turn the seat towards the door while you pull the rotation release

handle upwards.

2. Check that the shoulder strap slots are level with your child’s

shoulders. (7)

3. While pressing the button of the central adjuster, pull the shoulder

straps away from the seat with a ﬂat hand. Make sure to pull the

straps evenly so that they stay at the same length. (8)

4. Open the harness buckle. (9)

5. The height of the shoulder straps and the headrest can be adjusted

by pulling the release handle upwards at the back of the headrest

and pulling the headrest up or down. (10)

6. Position the shoulder straps over the marking at the sides of

the seat to use the magnets to keep the harness open while you

position the child. (11)

7. When the child is positioned, place the shoulder straps over the

child’s shoulders and close the buckle: CLICK! (12)

8. Pull the harness strap through the central adjuster in the direction

of the arrow straight up/forwards. Continue pulling until the

harness is a comfortable but a ﬁrm ﬁt. (13)

9. Turn the seat against or with the driving direction before driving

and check if the release handles show green and the seat is locked

into the driving direction. (14)

Positioning of the child

1. To remove the seat from the vehicle, turn the seat rear facing and

push the seat upwards while adjusting the ﬂoor support to its

shortest length.

2. Release the ISOﬁx connectors out of the seat by pushing down

the switch for the ISOﬁx connectors on both sides. Pull the ISOﬁx

release switch on both sides to disconnect from the ISOﬁx car

anchorage.

Removal of the seat from the vehicle

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BeSafe iZi Turn i-size in the language / languages: All languages as an attachment in your email.

The manual is 1,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BeSafe iZi Turn i-size Manual

Product: