768224

BeSafe iZi Modular A X1 i-Size Manual

3
Zoom out
Zoom in
Previous page
1/93
Next page
10 11
• Adjustable head rest
• Shoulder pads (2x)
• Side support
• Shoulder straps (2x)
• Harness buckle
• Crotch bar
• Seat cushion
• Reclining handle
• Release handle head rest
• Front brace
1a
1b
1c
1d
1e
1f
1g
1h
1i
1j
Preparing to install
Installation of the seat on the i-Size base
1. Check if the ISOfix and floor support indicators on the base are
green. (2)
2. Make sure that the front brace is installed on the base. The
operation of the front brace is described in the user manual for the
base. (2)
3. Make sure that the seat is always in the release position when you
want to install the seat on the base or take the seat o the base. The
two yellow arrows on the seat and the base must be aligned. (3) Use
the reclining handle to adjust the recline position, see step 6.
4. Position the seat in the correct position on the base untill it clicks
with the base and the indicator at the front shows green. (3)
5. When the seat is positioned rearfacing on the back seat of the
vehicle, you should, if possible, push the front seat of the vehicle
backwards, so that it is in contact with the child seat (4). If it is not
possible to obtain contact with the child seat, push the back rest of
the front seat of the vehicle forward as far as possible.
6. The seat can be taken o and turned around by pulling the seat
release handle at the front of the base (5,6). Make sure that the
two yellow arrows on seat and seatbase are aligned; this is the only
position where you can take o the seat.
7. The seat should only be turned around to forward facing when the
child is minimum 88 cm and 15 months. BeSafe recommends to use
the seat rearfacing for as long as possible.
8. When the seat is positioned forward facing, the front brace has to be
in position 1. (7)
9. The seat cannot be turned around in the BeSafe iZi Modular A RF.
This seat is only to be used rearfacing.
Positioning of the child
Removal of the seat of the i-Size base
1. Check that the shoulder strap slots are level with your child’s
shoulders. (12)
2. Open the harness buckle. (13)
3. Fold the crotch bar forwards into the “open position”. In this position,
the belts can be pulled out. (14)
4. Pull the shoulder straps away from the seat while the crotch bar is in
the “open position”. Make sure to pull on the belt straps only and not
on the shoulder pads. (15)
5. The height of the shoulder straps and the head rest can be adjusted
by pulling the release handle upwards at the back of the head rest
and pulling the head rest up or down. (16)
6. Position the shoulder straps over the marking at the sides of the seat
to use the magnets to keep the harness open while you position the
child. (17)
• The seat can be taken o by pulling the seat release handle at the
front of the base. Make sure that the two yellow arrows on seatbase
and seatbase are aligned; this is the only position where you can take
o the seat.
10. The seat can be reclined by pulling the reclining handle at the front
side of the seat. (8)
11. In a rearfacing position the seat should only be used in the 2 most
reclined positions. (9)
12. The leg room of the seat, in rearfacing position, can be made larger by
pulling the front brace box out from the base. The front brace box has
3 positions. To adjust the front brace position, the seat has to be taken
o and the base should be released from the ISOfix. (10)
13. The seat is delivered with removable SIP+ (side impact protection
+). This extra side impact protection should be used on the doorside
of the vehicle. To connect your SIP+ version, follow the instruction
drawings on the SIP+ included with your seat. The seat already oers
high level integrated side impact protection. This extra side impact
protection improves the protection in the side impact still further. (Not
on all models) (11)
14. Do not use the SIP+ on the seat when the space between seat and
door of the vehicle is too small, which might lead to a situation where
the seat is not positioned correctly on the vehicle seat.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeSafe iZi Modular A X1 i-Size at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeSafe iZi Modular A X1 i-Size in the language / languages: All languages as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info