652132
3
Zoom out
Zoom in
Previous page
1/8
Next page
10 11
! It is NOT ALLOWED to mount the seat in a front
passenger seat WITH AN ACTIVATED AIRBAG.
Crucial parts
1. Adjustable head rest
2. Shoulder straps (2x)
3. Harness buckle
4. Body hugger
5. Front brace
6. Central adjuster
7. Recline lever
8. Ratchet for front brace
9. Cap ISOfix connector (2x)
10. Switch for ISOfix connectors (2x)
11. Floor support
12. Height adjuster floor support
13. Floor support height indicator
14. Release handle head rest
15. Floor support position indicator
16. ISOfix car anchorage (2x)
17. ISOfix insertion clips (2x) (bottom side)
18. ISOfix connectors (2x)
19. ISOfix indicators (2x)
20. ISOfix release button (2x)
Preparing to install
Rearward-facing: ISOfix installation
1. The seat can only be installed rearfacing in
vehicles equipped with ISOfix anchorage points.
2. When mounting in the back seat of the vehicle, push the
front seat of the vehicle forward as much as possible.
3. When mounting in the front seat of the vehicle, adjust the
back rest into an upright position.
4. Positioned in the front seat of the vehicle, you should
position the seat against the dashboard.
5. If it’s not possible to position the seat against the dashboard,
position the seat as far as possible from the dashboard.
6. Find the ISOfix anchorage points in the vehicle. (21)
7. If your vehicle is not equipped with ISOfix insertion clips insert
these to make installation easier. (22)
8. You can find the ISOfix insertion clips under the base of the
seat or delivered separately with the seat.
9. Install the front brace by sliding the two pins into the oval tube
under the front side of the seat. Move the front brace inwards
with the ratchet. The ratchet is used to adjust the front brace in
both directions. Slide the switch on the ratchet up or down to
change direction. 23)
10. Pull both ISOfix connectors as far out as possible. (24)
11. The switch will go into the lowest position and locks the
ISOfix connectors.
12. Remove the caps from the ISOfix connectors by pressing down
the ISOfix release buttons. (25)
13. Fold down the floor support before you install the seat in your
vehicle. (26)
14. Place the seat sideways into the car with the front brace
towards you.
15. Turn the seat into the right position (with the front brace
against the back rest).
16. Click the ISOfix connectors in the ISOfix anchorage of the
vehicle. (27)
17. Make sure that all indicators on both sides are green. (28)
18. Move the front brace outwards with the ratchet. Continue
tightening until the brace is pressed well into the back rest of
the vehicle seat. (29)
19. Remove the cap around the floor support. An alarm sound will
start and stop when the seat is installed correctly with the floor
support in contact with the floor of the vehicle seat. (30)
20. Adjust the floor support so it is in contact with the floor of the
vehicle. (31)
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeSafe iZi Kid i-Size at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeSafe iZi Kid i-Size in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BeSafe iZi Kid i-Size

BeSafe iZi Kid i-Size Additional guide - English - 2 pages

BeSafe iZi Kid i-Size User Manual - German - 8 pages

BeSafe iZi Kid i-Size User Manual - French - 8 pages

BeSafe iZi Kid i-Size User Manual - All languages - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info