Manual BeSafe iZi Go Modular X1 i-Size (page 2 of 98) (All languages)

768222

Zoom out

Zoom in

1/98

8 9

! Vital information

• The child seat MUST NOT be installed in a front

passenger seat WITH AN ACTIVATED AIRBAG.

• iZi Go Modular can be installed rearfacing on iZi Modular

i-Size base or can be installed rearfacing with a 3-point car belt,

approved according to UN/ECE Regulation No.16 or other equivalent

standards.

• iZi Go modular is approved for children with a stature height from 40

to 75 cm, with a max. weight of 13 kg.

• The harness straps must always be locked when the child is in

the seat.

• The harness straps must be tightened without slack and not twisted.

• The shoulder pads contain magnets. Magnets can inﬂuence

electronic equipment such as pacemakers.

• Protect any part of the child’s body which is exposed to the sun.

• Remove the baby cushion including the white wedge, when the child

is taller then 60 cm. or older then 4 months.

• The white wedge in the bottom of the baby cushion can be removed

when the child needs more space under the buckle of the harness

system. (Not on all models)

• Remove the head space reducers on both sides from the headrest

cushion when the child is older then 3 months or if the head is not

ﬁtting anymore or when the baby has a stature height higher then 60

cm. (Not on all models)

• After an accident, the seat must be replaced. Although it may look

undamaged, if you were to have another accident, the seat may not

be able to protect your child to the level to which it was designed.

• Prevent the seat from becoming trapped or weighed down by

luggage, seats and/or slamming doors.

• Make sure you can ﬁt no more than one ﬁnger between the harness

and your child (1 cm).

• DO NOT attempt to dismantle, modify or add any part to the seat.

Warranty will be void if non-original parts or accessories are used.

• Never leave your child unattended in the seat.

• Make sure all passengers are informed about how to release your

child in case of emergency.

• Make sure luggage or other objects are properly secured. Unsecured

luggage may cause severe injuries to children and adults in case

of accidents.

• Never use the seat without the cover. The cover is a safety feature

and may only be replaced by an original BeSafe cover.

• Do not use any aggressive cleaning products; these may harm the

construction material of the seat.

• BeSafe advises that child seats should not be bought or sold second-

hand.

• KEEP this user manual for later use with the seat.

• DO NOT use the seat for longer than 7 years. Due to ageing, the

quality of the material may change.

1 3

7 10

click!

11 16 17

20 21

click!

< 60 cm

0-4 months

> 60 cm

> 4 months

> 25 cm

Thank you for choosing BeSafe iZi Go Modular

! It is important that you read this user manual BEFORE

installing your seat. Incorrect installation could endanger

your child.

! Warnings (EN 12790-2009) using the seat as a

reclined cradle

! IMPORTANT! KEEP FOR FUTURE REFERENCE.

• Never leave the child unattended.

• Do not use the seat as reclined cradle once your child can

sit unaided.

• This reclined cradle is not intended for prolonged periods of sleeping.

• It is dangerous to use this reclined cradle on an elevated surface, e.g.

a table.

• Always use the restraint system.

• This reclined cradle does not replace a cot or a bed. Should your child

need to sleep, then it should be placed in a suitable cot or bed.

• Do not use the reclined cradle if any components are broken

or missing.

• Do not use accessories or replacement parts other than those

approved by the manufacturer.

• If in doubt, consult either the car seat manufacturer or the retailer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BeSafe iZi Go Modular X1 i-Size in the language / languages: All languages as an attachment in your email.

The manual is 1,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BeSafe iZi Go Modular X1 i-Size Manual

Product: