Manual BeSafe iZi Flex fix i-size (page 4 of 101) (All languages)

768214

Zoom out

Zoom in

1/101

12 13

Guarantee

• Should this product prove faulty within 24 months of purchase

due to materials or manufacturing fault, except covers and harness

straps, please return it to the original place of purchase.

• The guarantee is only valid when you use your seat appropriately

and with care. Please contact your retailer, they will decide if the

seat will be returned to the manufacturer for repair. Replacement

or return cannot be claimed. The guarantee is not extended

through repair.

• The guarantee expires when there is no receipt, when defects are

caused by incorrect or improper use, when defects are caused by

abuse, misuse or negligence.

• For the correct usage of the airbag in combination with the seat

read the vehicle handbook.

• Make sure the indicators are green before you drive.

• Make sure the back of the seat is touching the backrest of the

vehicle seat and the isoﬁx connectors are pushed inside the seat

as far as possible. The red surface on top of the ISOﬁx release

handle must not be visible during driving.

• Make sure that the SIP bumpers are always connected with the

seat on the doorside and connected with the seat on the inner side

of the vehicle when there is enough space available.

! Warning: potential misuse

• Do take care when you remove the cover, as re-ﬁtting the cover is

the reverse process.

• Start to take o the backrest part ﬁrst and re-ﬁt the backrest part

as the last part.

• For washing instructions, see the washcare label at the inside of

the fabric cover.

Removing and reﬁtting the cover

Installation of 3 car seats

1. The SIP bumper on the inner side of the vehicle can be removed from

the seat to create more space next to the seat for an additional car

seat in the middle position of the vehicle. Remove a side bumper only

on the inner side of the vehicle and never on the door side. (24, 25)

2. To remove a SIP bumper, push the button and move the bumper

sideways and to the back, to hook it out of the fabric hooks. Keep the

SIP bumper for later usage. (26, 27)

3. To install a SIP bumper, ﬁrst hook in the lower hook (28), then hook

in the upper hook (29) and ﬁnally secure the bumper in the middle

by pushing the button (30) ﬁrst and releasing it when it’s positioned

against the seat. Check if the SIP bumper is connected correctly. Use

the SIP bumper always on the door side of the vehicle.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BeSafe iZi Flex fix i-size in the language / languages: All languages as an attachment in your email.

The manual is 1,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BeSafe iZi Flex fix i-size Manual

Product: