652130
4
Zoom out
Zoom in
Previous page
1/9
Next page
14 15
Removing the seat
1. If the seat is installed in the back seat of the vehicle, push
the front seat of the vehicle forward as much as possible.
2. Move the front brace inwards with the ratchet. (38)
3. Release the ISOfix connectors by pressing the release
mechanism on the ISOfix connectors. (39)
4. Push the switch on each side and push the ISOfix connectors
into the base. (40)
5. Pull the seat back towards the front. Turn the seat so you can
easily remove the seat.
6. Remove the insertion clips from the vehicle. Place them
under the base of the child seat.
7. To remove the front brace from the metal tube, move the
front brace outwards with the rachet, until the lock button of
the front brace appears. Push the lock button down with a
small screw driver, while pulling the front brace out. (41)
17. Click the ISOfix connectors in the ISOfix anchorage of the
vehicle. (32)
18. Remove the installation clips.
19. Make sure that all indicators on both sides are green. (33)
20. Push the seat towards the backrest of vehicle seat till the
frontbrace touches the backrest; the isofix arms slide in and
will click into a new position. (34)
21. Move the front brace outwards with the ratchet. Continue
tightening until the brace is pressed well into the back rest of
the vehicle seat. (35)
22. Adjust the floor support so it is in contact with the floor of
the vehicle. (36)
23. The height indicator of the floor support shows green when
the floor support is in contact with the floor. (37)
24. Positioned in the back seat of the vehicle, you should, if
possible, push the front seat of the vehicle backwards, so
that it is in contact with the child seat. If it is not possible to
obtain contact with the child seat, push the back rest of the
front seat of the vehicle forward as far as possible.
25. When you want to enlarge the available space for your
child, keep the isofix arms totally slided out without pushing
the seat towards the backrest, and tension the frontbrace
outwards with the rachet.
26. Make sure the floor support is fully pushed down, in contact
with the floor of the vehicle, and locked.
27. Make sure that all indicators on both sides are green.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BeSafe iZi Combi X4 ISOfix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BeSafe iZi Combi X4 ISOfix in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BeSafe iZi Combi X4 ISOfix

BeSafe iZi Combi X4 ISOfix Additional guide - English - 2 pages

BeSafe iZi Combi X4 ISOfix User Manual - German - 9 pages

BeSafe iZi Combi X4 ISOfix User Manual - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info