660734
5
Zoom out
Zoom in
Previous page
1/6
Next page
SLACKENING THE HARNESS
FITTING THE CAR SEAT WITH THE 3-POINT LAP&DIAGONAL SEAT BELT
1. The harness is slackened by pressing the lever (under the seat cover) on front
of the seat.
2. Press down on the label marked “Press” as you grip the two shoulder straps
with your other hand.
3. Pull the shoulder straps towards you to loose the harness.
4. Do not trap the harness adjuster straps as you press the lever down.
9-18kg
Step1. Place the child safety seat on the vehicls s seat ensuring it is firmly pressed
against the car seat backrest.
Step2.Thread the car seat belt in through the seat belt route slot in the seat s plastic
backrest furthest from the car s seat belt buckle, and then out through the
other seat belt route slot and fasten it into the seat belt buckle.
Step3. Check the webbing of the seat belt has not become twisted or tangled and
that the lap belt goes under the armrest and the diagonal belt under headrest
belt guide then goes over the red belt guide on the side of the backrest.
Step4.Place your knee on the base of the safety seat and grip the top piece of
seatbelt webbing. Pull the webbing upwards to tighten the seat belt.
(approx. 9 months to 4 years)
FITTING THE CAR SEAT USING THE BELT GUIDE
Step5.Finish tightening the webbing by pulling the diagonal strap upwards until
there is no slack and the seat is held firmly in place. Now you can strap your
child into the seat.
Make sure the seat belt has not become twisted. Also check that the cover is
not impeding the movement or fit of the seat belt webbing in any way.
To release your child seat follow the above instructions in reverse order.
ADJUST THE HEADREST HEIGHT
15-36kg
(approx. 3 years to 11 years)
According to children s different height, the headrest can be
adjusted up and down.
Step1. Put your left (or right) hand on the backrest.
Step2. Pull the button with your another hand.
Step3. Make the headrest up and down as your need.
To make sure that the position fits for your child.
IMPORTANT:Bofore fitting the seat remove the shoulder straps,crotch strap
and lap strap.
Step1. Place the child safety seat on the vehicls s seat ensuring it is firmly pressed
against the car seat backrest.
Step2. Place the child in the child safety seat.
Step3. Fasten the seat belt, making sure that both sections of the seat belt webbing go
under the armrest neat the buckle, the diagonal belt go through the red belt
guide on the side of the headrest. Check that the webbing has not become
twisted and tighten the seat belt by pulling the diagonal strap upwards.
Make sure the seat belt has not become twisted.Also check that the cover is
not impeding the movement or fit of the seat belt webbing in any way.
To release your child. Simply unfasten the seat belt in the normal way.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bertoni Uno at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bertoni Uno in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info