605238

Bertazzoni P905INE Manual

7
Zoom out
Zoom in
Previous page
1/44
Next page
7
Pan detection
The pan detection ensures a perfect safety. The induction doesn’t work:
If there is no pan on the heating zone or if this pan is not adapted to the induction. In
this case it is impossible to increase the power and the display shows [ U ]. This
symbol disappears when a pan is put on the heating zone.
If the pan is removed from the heating zone the operation is stopped. The display
shows [ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone.
The cooking continues with the power level setted before.
After use, switch the heat element off: don’t let the pan detection [ U
] active.
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are
still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don’t touch the heating zones and don’t put
any heat sensitive object on them. There are risks of burn and fire.
Booster and Double Booster function
The Booster function [ P ] and the Double Booster [
] grants a boost of power to the
selected heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high power.
Power is foreseen for example to heat up rapidly big quantities of water, like nuddles.
Start up / Stop the 1st booster
Action Control panel Display
Start up the booster press key [ B ] control light is lighting
Zone selection press key [ + ] or [ - ] from the desired
heating zone [ P ]
Stop the booster press key [ - ] from the boosted
heating zone [ 9 ]
Start up / Stop the 2nd booster
Action Control panel Display
Start up the 1
st
booster press key [ B ] control light is lighting
Start up the 2
nd
booster press key [ B ] control light is blinking
Zone selection press key [ + ] or [ - ] from the desired
heating zone [ then P ]
Stop the booster press key [ - ] from the boosted
heating zone [ 9 ]
Power management
The hole cooking hob is equipped by a maximum of power. When the booster function is
activated, and not to exceed the maximum power, the electronic system orders to reduce
automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of power allowed ( [ 6 ] or [ 8 ] ).
Heating zone selected The other heating zone: (example: power level 9)
[ P ] is displayed [ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bertazzoni P905INE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bertazzoni P905INE in the language / languages: English, French, Italian as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info