Manual Bertazzoni HERITAGE serie (page 29 of 40) (English)

605208

Zoom out

Zoom in

1/40

Set the desired food temperature with and confirm .

The display will show the set temperature and the actual temperature measured by

the probe. The oven will turn off when the desired food temperature is reached. End

of cooking will be confirmed with a tone. To stop tone touch any touch control area.

Leave menù .

After 3/5 seconds of inactivity the screen returns to the status screen.

The probe works by measuring the temperature inside a joint of meat. There are no

set cooking times as the cooking time depends on how long it takes far the internal

temperature of the meat to reach the set care temperature. This can vary depending

on the weight and type of meat. For this reason it is not recommended that the

probe is used with the automatic timer.

The meat is ready when the temperature set on the right hand side of the clock

fascia is reached and the oven then switches off.

Foods suitable for use with the probe are large joints of boneless meat or joints that

have been deboned & stuffed eg. topside of beef, pork fillet. deboned leg of

lamb/pork.

It is important that:

- Meat should be as close to room temperature as possible.

- The probe

inserted into the centre of the joint

of meat to give accurate results.

Once in the centre of the meat it is cooked to the temperature selected on the clock

fascia panel.

If the probe is not fully inserted to the centre of the meat, the desired cooking

temperature may not be reached.

To use:

Remove the probe part cover on the left hand side of the oven and insert the

short metal end of the probe.

2 Then place the meat in the roasting tin on the 2nd shelf from the base of the oven

and insert the long end of the probe into the thickest part of the meat towards the

centre. Make sure the rubber probe cable is not trapped in the door, or touching the

oven shelf as this could affect the results. Any slack in the cable should rest in the

roasting tin.

When both temperatures on the display reach the temperature set, the oven will

switch off.

Below there is a chart to be used as a guideline. Meat cooked this way must not

exceed 2.5kg in weight and should be left at room temperature for a couple of hours

before cooking.

The probe is best used for red meats and pork, as suggested by the guideline

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bertazzoni HERITAGE serie in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bertazzoni HERITAGE serie

Bertazzoni HERITAGE serie Usermanual and installation guide - Dutch - 40 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bertazzoni HERITAGE serie Manual

Product: