605208

Bertazzoni HERITAGE serie Manual

11
Zoom out
Zoom in
Previous page
1/40
Next page
11
GAS HOB
Using the gas hob As the following points:
- To light a burner, press in the control knob (Fig.14A-14B) and turn it anti-
clockwise, to the large flame position.
- Continue to hold the knob In until the burner lights. Adjust the flame as required,
continue to hold the knob in far 5 to 10 seconds before releasing
- The Chef Top (optional) is powered by the gas burners.
- See page 7 for usage instructions.
Fig 14A Fig 14B
The dual wok burner The central burner of the dual wok burner can be used independently of
the outer
burner to give further flexibility.
- To light the central burner, press in the control knob (Fig.15A-15B) and turn it
anti-clockwise to the bold single ring position
-
Continue to hold the knob in until the burner lights. Adjust the flame as required
The minimum setting is the lighter single ring position.
- To light the outer burner as well as the central burner. turn the knob to the bold
double ring. Adjust the flame as required
The minimum setting far the central and outer burner is the lighter double ring
position.
Fig 15A Fig 15B
Lighting the burners The symbol above each knob indicates which burner that knob controls.
- A flame failure (thermocouple) device on each burner acts as a safety gas cut-
off in case the flame is accidentally blown out.
- A thermocouple detects the absence of a flame and stops the supply of gas.
- The thermocouple must be heated for a few seconds when the burner is ignited
before the knob is released.
To light a burner:
1 Push and turn the control knob anti-clockwise to the large flame
position. The ignition candle will spark and ignite the gas.
2 Keep the control knob pressed In for 5-10 seconds to activate the flame failure
device,
then release the knob. Adjust the flame between the large and small
flame symbols as required.
In the event of a power failure the burners can be lit with a match or gas lighter The
flame failure devices will continue to function normally.
GAS BURNER DIMENSION
Burne
r
Diam (mm) Powe
r
Utilization
Auxiliary Ø 50 mm 1 kW Use with smaller pans for boiling and simmering and the preparation of
sauces.
Semi-rapid (and
Chef Top)
Ø 70 mm 1.75 kW Use for normal frying and boiling in medium and small pans.
Rapid Ø 95 mm 3 Kw Use with large and medium pans of water for frying and rapid boiling.
Dual inner/outer Ø 43/140 mm 0.48-5 kW Use with woks,griddles and frying pans or for large pans and rapid
boiling.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bertazzoni HERITAGE serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bertazzoni HERITAGE serie in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bertazzoni HERITAGE serie

Bertazzoni HERITAGE serie Usermanual and installation guide - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info