605228

Bertazzoni HER90 6 MFE SNET Manual

14
Zoom out
Zoom in
Previous page
1/40
Next page
14
INDUCTION
60x60 model 90x60 or 100x60 model
Fig 17A Fig 17B
Functions
: Keep Warm 42°C
: Keep Warm 70°C
1…9 : Power Level
P : Booster
A : Heating Accelerator
Hob control knob These knobs provide control of the ceramic hob's cooking zones.
The zone it controls is shown above each knob. Turn the knob to the right to set the
zone's operating power; the settings range from a minimum of 1 to a maximum of 9.
The working power is shown by a display on the hob.
Heating accelerator Each cooking zone is equipped with a heating accelerator.
This system allows the zone to be operated at peak power for a time proportional to
the heating power selected.
To start the heating accelerator, turn the knob to the left, select setting "A" and then
release. The letter "A" will appear on the display on the hob.
You now have 3 seconds to select the heating setting of your choice. Once a setting
between 1 and 9 has been selected, "A" and the chosen setting will flash in
alternation on the display. '
While the heating accelerator is in operation, the heating level can be increased at
any time. The "full power" time will be modified accordingly. If the power is reduced
by turning the knob anticlockwise, option "A" is automatically deactivated.
Power Function The power function allows the user to operate each heating zone continuously at the
maximum power for a time of no more than 10 minutes. This function can be used,
for example, to bring a large amount of water to the boil in a hurry, or to turn up the
heat under meat.
Turn the knob clockwise and set heating level 9, then use the knob to set the "P"
position and release il. "P" appears on the corresponding zone display.
After 10 minutes, the power is reduced automatically, the knob returns to the 9
setting and the "P" disappears.
However, the power function can be turned ott at any time by reducing the heating
level. .
When the power function is selected for one heating zone (e.g. the left front zone),
the power absorbed by the second zone (Ieft rear zone) might be reduced to supply
the maximum available energy to the first zone.
Consequently, the power function takes priority over the heating accelerator.
If a pan is removed from the cooking zone while the power function is on, the
function is switched off.
Holding Function The holding function keeps the temperature of the bottoms of pans at about 42°C or
(60x60 model only)
70°C . This allows foods to be kept hot with optimal energy consumption and to be
heated gently. The holding function can be kept in operation for up to 2 hours.
The holding function is and is indicated by the relevant symbols on the cooking
zones.
Bridge Function
This function allows to use the 2 cooking zones at the right at same time with the
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bertazzoni HER90 6 MFE SNET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bertazzoni HER90 6 MFE SNET in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bertazzoni HER90 6 MFE SNET

Bertazzoni HER90 6 MFE SNET Usermanual and installation guide - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info