605225
16
Zoom out
Zoom in
Previous page
1/40
Next page
16
necessary for the heating process.
Vessels made from the following materials are not suitable:
glass;
porcelain;
pottery;
steel, aluminium or copper without magnetic bottom;
To check that a pan is suitable, simply place a magnet close to its bottom:
if the magnet is attracted, the pan is suitable for induction cooking. If no magnet is to
hand, put a little water in the pan, place it on a cooking zone and switch it on. If the
symbol appears on the display instead of the power, the pan is not suitable.
The pans used for cooking must have certain minimum diameters to ensure
satisfactory operation.
Pans larger than the cooking zones can also be used, but it is important to ensure
that the bottom of the pan does not touch other cooking zones, and that it is always
centred over the perimeter of the cooking zone (Fig.18A-18B).
Fig 18A Fig 18B
Use only vessels specially designed for induction cooking, with thick, completely flat
bottom; if these are not available, the pans used must not have crowned (concave or
convex) bottom (Fig.19).
Fig 19
Pan present device Each cooking zone is equipped with a "pan present" device, which ensures that
cooking cannot start unless a suitable pan is present on the cooking zone and
properly positioned.
If the user attempts to switch on the cooking zone with the pan not positioned
properly or with a pan which is not of suitable material, a few seconds after the zone
is switched on the symbol will appear to warn the user that an error has been
made.
Residual heat Each cooking zone is equipped with a device which warns of residual heat. After any
cooking zone is switched off, a flashing ‘H’ may appear on the display. This warns
that the cooking zone concerned is stili very hot.
Locking-out the hob When not in use, the hob can be "locked out" to prevent children from accidentally
switching it on.
With the cooking zones off, turn the knobs of zones 1 and 2 to the left
simultaneously until ‘’L’’ appear on the power
display and then release the knobs.
To deactivate it, repeat the same procedure: the cooking zone displays will stop
displaying the ‘’L’’, indicating that the cooking zone lock-out function has been
deactivated.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bertazzoni HER120 6G MFE DNET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bertazzoni HER120 6G MFE DNET in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bertazzoni HER120 6G MFE DNET

Bertazzoni HER120 6G MFE DNET Usermanual and installation guide - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info