806080

Bernina Bernette Sew and Go 7 Manual

60
Zoom out
Zoom in
Previous page
1/64
Next page
Trouble shooting guide
53
Seam
puckering
Patterns are
distorted
1. The needle thread tension is too tight.
2. The needle thread is not threaded
correctly.
3. The needle is too heavy for the fabric
being sewn.
4. The stitch length is too long for the
fabric.
1. The correct presser foot is not used.
2. The needle thread tension is too tight.
1. Select the correct presser foot.
2. Loosen the thread tension .
1. Loosen the thread tension.
2. Rethread the machine.
3. Choose a needle to suit the thread and
fabric.
4. Make stitch length shorter.
The sewing
machine
doesn't
operate
1. The machine is not turned on.
2. The presser foot lifter is raised.
1. Turn on the machine.
2. Lower the presser foot lifter.
The
machine
jams
Remove the upper thread and bobbin case,
turn the handwheel backwards and forwards
by hand and remove the thread remains.
The
machine is
noisy
1. Fluff or oil have collected on the hook
or needle bar.
3. The needle is damaged.
1. Clean the hook and feed dog as described.
3. Replace the needle.
Uneven
stitches,
uneven
feed
1. Poor quality thread.
2. The bobbin case is not threaded
correctly.
3. Fabric has been pulled.
1. Select a better quality thread.
2. Remove the bobbin case, the thread and
reinsert correctly.
3. Do not pull on the fabric while sewing, let
it be taken up by the machine.
Problem Cause Correction
5. Thread is caught in the hook.
4. Slight humming sound coming from
internal motor.
4. Normal.
6. The feed dog is packed with fluff.
Remove the upper thread and bobbin case,
turn the handwheel backwards and forwards
by hand and remove the thread remains.
1. Thread is caught in the hook.
2. The feed dog is packed with fluff.
3. Connect the power line plug to the electric
outlet.
3. The machine is not plugged in.
16
16
50
50
50
19
10
13
13
13
9
7
4
4
15
13
-
-
Reference
5. If you are sewing thin fabric. 5. Sew with stabilising material under the
fabric.
… 60 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina Bernette Sew and Go 7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina Bernette Sew and Go 7 in the language / languages: English as an attachment in your email.

The manual is 9.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info