806080
44
Zoom out
Zoom in
Previous page
1/64
Next page
5mm
2cm
Reverse
side
Reverse
stitches
Basting
stitching
Inserting a side zipper
- Baste the zipper opening on the garment.
Place the right sides of the fabric together.
Sew a bottom seam 2cm from the right
edge to the zipper bottom stop position.
Sew a few stitches in reverse to lock.
Increase the stitch length to maximum,
set the tension below 2, and baste the
remaining length of the fabric.
- Fold back to the left seam allowance.
Turn under the right seam allowance to
form 3mm (1/8 inch) fold.
- Attach the zipper foot. Attach the right
side of the presser foot pin to the holder
when sewing the left side of the zipper.
Attach the left side of the presser foot pin
to the presser foot holder when sewing
the right side of the zipper.
- Stitch the left side of zipper from bottom
to top.
- Turn the fabric right side out, stitch across
the lower end and right side of zipper.
- Stop about 5cm (2 inches) from the top of
zipper. Remove the basting and open the
zipper. Stitch the remaining part of the
seam.
37
Zipper insertion
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina Bernette Sew and Go 7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina Bernette Sew and Go 7 in the language / languages: English as an attachment in your email.

The manual is 9.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info