Manual Bernina Bernette Sew and Go 7 (page 33 of 64) (English)

806080

Zoom out

Zoom in

1/64

Overlock stitches

Using the overlock foot

Change the presser foot to the zig zag foot

(T) .

Sew overlock stitches along the edge of the

fabric so that the needle drops over the edge

of the fabric on the right side.

Using the zig zag foot

5.0~7.0 2.0~3.0

Change the presser foot to the overlock foot

(E).

Sew the fabric with the fabric edge against

the guide of the overlock foot.

Attention:

The overlock foot should be used to sew

with stitches 06 and 09 only and do not set

the stitch width narrower than "5.0". It is

possible that needle could hit the presser

foot and break when sewing other stitches

and width.

2.5~4.5 2.0~3.0

06 09

07 10

Sew overlock stitches along the edges of fabric to prevent them from fraying.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bernina Bernette Sew and Go 7 in the language / languages: English as an attachment in your email.

The manual is 9.47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bernina Bernette Sew and Go 7 Manual

Product: