Manual Bernina Bernette 340 Deco (page 11 of 75) (English)

614698

Zoom out

Zoom in

1/75

Getting ready to Embroider

Inserting the bobbin

Place the bobbin in the bobbin holder with the thread unwinding

counter-clockwise.

1. Thread

2. Bobbin holder

Guide the thread into front notch on the front of the bobbin holder.

Draw the thread to the left, sliding it between tension spring blades.

3. Front notch

Continue to draw the thread lightly until the thread slips into side

notch.

4. Side notch

Pull out about 10 cm (4") of thread to the rear.

Refer to the threading chart shown on the hook cover plate to

check the threading

Re-attach the hook cover plate.

5. Bobbin thread

6. Hook cover plate

7. Threading chart

Can Bernette Deco 340 be usef for normal stitching ? I would like to know before purchasing item. Submitted on 21-7-2020 at 13:29
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bernina Bernette 340 Deco in the language / languages: English as an attachment in your email.

The manual is 14,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bernina Bernette 340 Deco Manual

Product: