Manual Bernina Bernette 15 (page 76 of 136) (English, German, Dutch, French)

453316

Zoom out

Zoom in

1/136

10 12

Install the darning plate. (1)

Change presser foot to button sewing foot.

Turn the stitch length dial to "0".

Position the work under the foot. Place the

button on the marked position and lower the

foot. Set the pattern selector knob on " "

or " " and sew a few securing stitches.

Select the zigzag stitch width according to

the distance between the two holes of the

button. Turn the handwheel to check if the

needle goes into the right and the left hole of

the button without any obstruction (adjust the

stitch width according to the button). Slowly

sew on the button with about 10 stithces.

Select pattern " " and sew a few securing

stitches.

If a shank is required, place a darning needle

on top of the button and sew. (3) For buttons

with 4 holes, sew through the front two holes

rst (2), push work forward and then sew

through the back two holes as described. (3)

Please note:

No "S" marking is shown on the stitch length

dial by model 10.

Sewing on buttons

502020.75.24_021V4D0101_1010_IM_bernette 10 12 15_EN_DE_NL_FR

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bernina Bernette 15 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 14,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bernina Bernette 15 Manual

Product: