614581
45
Zoom out
Zoom in
Previous page
1/52
Next page
44
Cleaning, maintenance
Cleaning, Maintenance
Cleaning the screen and the sewing computer
Wipe with a damp cloth.
Feed-dog area
Clean the sewing computer after every use - remove any lint from under the
stitch plate and in the hook area.
power switch to «0» (off)
pull out plug from electrical outlet
remove presser foot and needle
open the free arm cover
press the stitch plate down at the back right corner, lift and remove
clean the area with the lint brush
replace the stitch plate
Cleaning the hook
power switch to «0» (off)
pull out plug from electrical outlet
remove the bobbin case
push the release lever to the left
let down the locking lever and the black hook race cover
remove the hook
clean the hook race with a cloth or brush, never use a sharp instrument
replace the hook, turning the handwheel if necessary until the hook driver is
on the left
close the hook race cover and secure with the locking lever, the locking pin
must engage
check by turning the handwheel
insert the bobbin case
Lubricating
power switch to «0» (off)
pull out plug from electrical outlet
squeeze 1 or 2 drops of oil into the hook race
run the sewing computer for a short time without thread to prevent oil
soiling your work
Disconnect plug from the socket before cleaning or lubricating!
Never use alcohol, petrol, white spirit or any type of solvent to
clean the sewing computer!
033301.71.04_2014-02_Manual_B330_B350_PE_B380_EN
45


Need help? Post your question in this forum.

Forumrules
1

Forum

bernina-b380

Reset search

  • Hi my Bernini is sewing on one spot. How do I make it sew straight sewing Submitted on 25-7-2020 at 05:59

    Reply Report abuse
  • Hi
    I am trying to find my way to seem No 107on my chart. But for some reason I can only find all the seems with only 2 digets fx button hole is #11
    Any one know how I can do this? I wish to do a small patch work bot are stuck.
    Thanks Submitted on 16-2-2020 at 19:52

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina B380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina B380 in the language / languages: English as an attachment in your email.

The manual is 8,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina B380

Bernina B380 User Manual - German - 50 pages

Bernina B380 User Manual - Dutch - 52 pages

Bernina B380 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info