614581
38
Zoom out
Zoom in
Previous page
1/52
Next page
37
Sewing stitches - Buttonholes
Marking the length of manual buttonholes
mark the buttonhole length in the desired position
use Buttonhole foot/sole no. 3 */**/***
Marking the length of automatic buttonholes
mark the length of just one buttonhole
after sewing the first buttonhole, the length for all subsequent buttonholes is
automatically programmed
mark only the beginning of all subsequent buttonholes
use Automatic buttonhole foot with slide no. 3A
Marking the length of keyhole buttonholes
mark the bead length only
the correct length eye will be added when the buttonhole is sewn
Test sewing
always sew a test sample on the fabric with stabilizer you intend to use
select the buttonhole type you intend to use
sew the buttonhole in the same direction on the fabric (horizontal or vertical,
with or against the grain)
cut the buttonhole open
push the button through
adjust the buttonhole length if necessary
To adjust the bead width
alter the stitch width
Altering the stitch length
stitch length adjustments affect both buttonhole beads (spacing between
the stitches)
reprogram the buttonhole length after changing the stitch length
Balance for automatic and manual buttonholes
Any balance alterations to the manual and auto-length buttonholes affect both
beads identically because they are sewn in the same direction.
If a buttonhole is sewn at right angles to the
fabric edge/fold, we recommend the use of
the height compensating plates for buttonho-
les (available as optional accessory).
Place the plates from the back between fabric
and bottom of slide foot up to the thick part of
the fabric and push to front.
When all buttonholes have been sewn,
return balance to the normal setting!
033301.71.04_2014-02_Manual_B330_B350_PE_B380_EN
38


Need help? Post your question in this forum.

Forumrules
1

Forum

bernina-b380

Reset search

  • Hi my Bernini is sewing on one spot. How do I make it sew straight sewing Submitted on 25-7-2020 at 05:59

    Reply Report abuse
  • Hi
    I am trying to find my way to seem No 107on my chart. But for some reason I can only find all the seems with only 2 digets fx button hole is #11
    Any one know how I can do this? I wish to do a small patch work bot are stuck.
    Thanks Submitted on 16-2-2020 at 19:52

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina B380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina B380 in the language / languages: English as an attachment in your email.

The manual is 8,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina B380

Bernina B380 User Manual - German - 50 pages

Bernina B380 User Manual - Dutch - 52 pages

Bernina B380 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info