614581
23
Zoom out
Zoom in
Previous page
1/52
Next page
22
Preparation - Sewing
Important Facts about Sewing Needles
The thread is chosen according to use. For a perfect sewing result, thread and
fabric quality play an important role. It is recommended to use quality brands.
Cotton thread
cotton thread has the advantage of being a natural fiber and therefore is
especially suitable for sewing cotton fabrics
if cotton thread is mercerized, it has a slight sheen
Polyester thread
it has a high tensile strength and is particularly colorfast
polyester thread is more flexible and is recommended where a strong and
elastic seam is required
Thread
Needles, Threads
Correct needle/thread combination
When sewing, the thread should travel smoothly down the long groove on the
front of the needle.
Too thin thread or too thick needle
The thread has too much clearance in the groove. Skipped stitches and
damage to the thread can occur.
Too thick thread or too fine needle
The thread rubs on the edges of the groove and can get jammed. This can
break the thread.
Needle, Thread and Fabric
Care must be taken when choosing needle and thread.
The correct needle size depends on the selected thread and fabric. The fabric
weight and type determine the thread weight, needle size and point form.
Checking the needle condition
The needle condition should be checked and the needle
replaced regularly. A defective needle not only damages the
fabric but also the sewing computer.
Follow these guidelines:
Always replace the needle when starting a new sewing project.
Fabric/Thread Needle size
Fine fabrics:
Fine thread (darning thread, embroidery thread) 70-75
Medium weight fabrics:
Normal thread 80-90
Heavy weight fabrics: 100, 110, 120
033301.71.04_2014-02_Manual_B330_B350_PE_B380_EN
23


Need help? Post your question in this forum.

Forumrules
1

Forum

bernina-b380

Reset search

  • Hi my Bernini is sewing on one spot. How do I make it sew straight sewing Submitted on 25-7-2020 at 05:59

    Reply Report abuse
  • Hi
    I am trying to find my way to seem No 107on my chart. But for some reason I can only find all the seems with only 2 digets fx button hole is #11
    Any one know how I can do this? I wish to do a small patch work bot are stuck.
    Thanks Submitted on 16-2-2020 at 19:52

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina B380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina B380 in the language / languages: English as an attachment in your email.

The manual is 8,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina B380

Bernina B380 User Manual - German - 50 pages

Bernina B380 User Manual - Dutch - 52 pages

Bernina B380 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info