149Messages
Messages on the Screen
The user must do something, before the
function can be carried out, or the user's
attention will be drawn to a specific fact.
Does the user really want to carry out the
function? For example delete data, etc.
Press the button «Drop feed dog». The
message disappears automatically if the feed
dog position was changed.
Check upper thread and perhaps lower
thread.
The winder speed can be changed with the
stitch width knob or the «+» und «-» on-
screen buttons. If the winder is turned off or
«ESC» is pressed, the message disappears
automatically.
The message disappears automatically if the
presser foot was lowered.
The message disappears automatically if the
presser foot was raised.
Corresponding instructions are on page 103
of the manual.
This notification will appear after approx.
180,000 stitches. After cleaning/oiling clear
the display by touching «OK». The display
can be cleared temporarily by touching
«ESC», but will appear again when restarting
the sewing computer. After clearing with
«ESC» for the third time, the cleaning
notification will only appear again after a
further approx. 180,000 stitches.
Warning
Query
Lower feed dog
Thread breakage or empty spool.
The winder is on.
Lower presser foot.
Raise presser foot.
The embroidery computer must be
cleaned / lubricated.
In special cases messages may appear on the screen. They serve as a reminder,
warning, or confirmation of selected applications and functions.
Message Notes
