453295
10
Zoom out
Zoom in
Previous page
1/138
Next page
Setting up the machine10
Attaching the thread spool
· raise the needle and presser foot
· turn the power switch to «0» (off)
· attach the foam pad
· place spool on pin (spool turns clockwise)
· attach the appropriate spool disc - diameter of spool
disc is disc size. There must be no clearance between
the disc and the spool
· take thread through rear guide A
· then into slit of upper thread tension
Down
· pull thread down to the right of the take-up cover to B
Up
· take thread up to the left of the cover to C in the
direction of the arrow, placing it in the take-up lever
Down
· take thread down and through guides D and E
Refer to the safety instructions!
Threading the upper thread
Needle Threader
B
A
Thread in hook
· lower the presser foot
· lay the thread behind
hook B and hold lightly
Lever down
·press lever A down and
simultaneously guide the
thread around hook B to
the right to the needle
Thread in front of needle
· put the thread from the
front into the guide until
it catches in the hook
Release the lever and
thread
· let go of lever A and
thread
Bringing up the lower thread
Bringing up the lower thread
· if bobbin thread is cut on the cutter
(page 8), there is no need to bring it up
· hold the upper thread
· sew one stitch
· pull the upper thread to bring the lower
thread up through the stitch plate hole
· take both threads through the slit on the
presser foot to the back
· pull threads over the cutter
Note:
The bobbin thread must be brought up
through the stitch plate for certain types
of work. The length of thread is sufficient
for most normal work if the lower thread
cutter has been used.
A
C
D
E
B
185_BA_engl 16.4.2004 11:30 Uhr Seite 10
030866.51.04_0401_a185_EN
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina Artista 185 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina Artista 185 in the language / languages: English as an attachment in your email.

The manual is 13,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina Artista 185

Bernina Artista 185 User Manual - German - 138 pages

Bernina Artista 185 Additional guide - Dutch - 40 pages

Bernina Artista 185 User Manual - Dutch - 137 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info