614660
33
Zoom out
Zoom in
Previous page
1/132
Next page
33Buttonholes
Corrections for thick buttons
·for buttons which are particularly
thick, e.g. raised buttons etc., do
not move the vertical line right up
to the edge of the button
·move it to within about 14 mm of
the right edge of the button,
depending on the button height
Recommendation
·sew a test buttonhole on a scrap of
the fabric and interfacing you
intend to use
·cut buttonhole open
·push button through hole
·correct the size if necessary
Stitch counter buttonholes (all types)
artack, securing stitches
·the machine sews 5 bartack
stitches and secures the
buttonhole automatically
·auto appears under the graphic of
the buttonhole on the screen
·the buttonhole is now programmed
·all subsequent buttonholes will be
sewn as programmed
Changes
·the buttonhole must be
reprogrammed after altering the
stitch length, width, or balance
For buttonhole example, refer to the
artista 180 Sewing Manual, page 27.
Bartack, 2nd bead
·the machine sews the end of the
buttonhole and automatically
switches to stitching the reverse
bead
·Continue stitching the reverse
bead, stopping when the needle is
even with the beginning of the
buttonhole
·press and release the quick reverse
button
1st bead length
·sew the first bead, stopping the
machine at the desired
buttonhole length
·press and release the quick reverse
button on the frame
Presser foot
·select buttonhole
·touch the presser foot 3 symbol
·the machine registers that the
stitch counter program has been
selected
·the buttonhole length is now
measured by the stitch counter, i.e.
number of stitches
3
The first bead of the buttonhole is
sewn forward and the second,
backwards
Stitch using Buttonhole Foot 3 or
Automatic Buttonhole Foot 3A; sew
at a consistent speed.
The appearance of a stitch counter
buttonhole can vary on different
types of fabric so it must be
reprogrammed for different fabrics.
bed_artista_180_engl_V3 7.10.2002 16:29 Uhr Seite 33
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina Artista 180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina Artista 180 in the language / languages: English as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina Artista 180

Bernina Artista 180 User Manual - English - 40 pages

Bernina Artista 180 User Manual - German - 40 pages

Bernina Artista 180 User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info