614660
8
Zoom out
Zoom in
Previous page
1/132
Next page
Setting up the machine8
To remove
· raise the needle
· turn power switch to “0”
· open the accessory box
cover
· open the bobbin cover
· grasp the latch of the
bobbin case
· remove case
Bobbin case
To insert
· hold the bobbin case
latch
· the opening on the case
should be at the top
· insert so that it engages
· close the bobbin cover
· close the accessory box
cover
Bobbin thread cutter
· insert the bobbin case
· take thread over cutter (A)
· cut thread
Note:
For normal sewing, the
bobbin thread does not
have to be brought up as
the loose end is just the
right length to start sewing.
Inserting the bobbin
The bobbin must turn
clockwise when the thread
is pulled.
Insert the bobbin so that
the thread runs clockwise. Pull the thread counter-
clockwise into the slot. Pull the thread to the left
under the spring until it
lies in the T-shaped slit at
the end of the spring.
Winding the bobbin
Winding the bobbin
· turn power switch on
· place empty bobbin on
spindle
Thread cutter
· cut the thread on the
thread cutter
Threading the bobbin
· following the direction of the arrow take thread through
the rear guide and round the pre-tension stud
· place the thread end through one of the inner holes in
the bobbin and hold the thread tail securely in one hand
· press the engaging lever against the bobbin
· press the foot control
the motor stops automatically when the bobbin is full
· remove the bobbin
A
Warning:
If your sewing computer is
equipped with an embroidery
bobbin case, thread the bob-
bin thread in the guide spring
only when the embroidery
module (optional accessory)
is in use.
Refer to the safety
instructions!
bed_artista_180_engl_V3 7.10.2002 16:29 Uhr Seite 8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina Artista 180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina Artista 180 in the language / languages: English as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina Artista 180

Bernina Artista 180 User Manual - English - 40 pages

Bernina Artista 180 User Manual - German - 40 pages

Bernina Artista 180 User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info