453296
67
Zoom out
Zoom in
Previous page
1/120
Next page
Needle, thread, fabric feed
67
Feed-dog and fabric feed
Height compensation tool
Feed-dog and sewing corners
Let the fabric feed evenly!
Holding back will result in
knots.
Pulling or pushing will
result in gaps.
The feed-dog can work
normally when the foot is
level.
If the foot is at an angle,
e.g. when sewing over
thick to thin or vice-versa,
the feed-dog can not grip
and feed the fabric and
the work sticks.
To solve this problem,
place one, two or three
compensating plates as
required behind the needle
under the presser foot.
Correct this by placing one
or more compensating
plates as close as possible
to the edge of the fabric.
When sewing corners only
a small section of the
fabric is actually on the
feed-dog so that it cannot
grip the fabric well.
The gap between the two
rows of teeth is relatively
large due to the width of
the stitch plate hole.
To correct the height in
front of the foot, place
one or more plates to the
right of the foot next to
the needle. Sew until the
foot is level again and
remove the plates.
1
Feed-dog and stitch length
With each stitch the feed-dog moves forward by one step.
The length of this step is determined by the stitch length selected. With an extremely short stitch
length, the steps are also short. The fabric moves under the foot quite slowly, even at full sewing
speed. Buttonholes, satin stitch and decorative stitches are all sewn with a very short stitch length.
Important
BA_165_engl 16.4.2004 9:34 Uhr Seite 67
030787.52.04_0401_a165_EN
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina Artista 165 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina Artista 165 in the language / languages: English as an attachment in your email.

The manual is 11,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina Artista 165

Bernina Artista 165 User Manual - English - 40 pages

Bernina Artista 165 User Manual - German - 121 pages

Bernina Artista 165 Additional guide - Dutch - 40 pages

Bernina Artista 165 User Manual - Dutch - 122 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info