453296
7
Zoom out
Zoom in
Previous page
1/120
Next page
Setting up the machine
7
Larger sewing surface
· the sewing table
increases the sewing
surface
·free arm for larger
tubular items such as
pant legs and waistbands
The power cable is stored in the case
· plug A into machine
· plug B into electrical outlet
Foot control cable
· plug C into machine
Sewing speed
· control the sewing speed
by depressing the foot
control with your toe
· raise or lower the needle
by tapping on the foot
control with your heel
Use only foot controller
type LV1 for sewing
machine model 165
(USA/Canada only)
Raising and lowering the
presser foot.
· the presser foot lifter
raises and lowers the
presser foot
· push to the right with
your knee
· the presser foot is raised
and the feed-dogs are
lowered simultaneously
· the feed-dogs come up
automatically as soon as
the first stitch is sewn
Sewing table
Power cable
Foot control
Cable tidy
· wind the cable round the
spool
· insert the plug into A
When sewing
· unwind the cable to the
desired length and slip
into B or C
Power switch
The power switch is on the
handwheel side of the machine
1 the machine is switched on
0 the machine is switched off
The sewing light is switched on
and off within the Setup
program.
Refer to the safety
instructions!
FHS (Free Hand System) presser foot lifter
Attaching the presser
foot lifter
· the presser foot lifter is
stored in the case.
· insert the presser foot
lifter into the opening in
the base plate
· you should be able to
operate the lifter in your
normal sitting position.
Note:
Your dealer can adjust the
position if necessary.
A
B
C
To attach
· push over the free arm
and press firmly so that it
engages on the fixing lug
(needle and presser foot
fully raised)
To remove
· pull to the left
· remove
Seam guide
· insert into the groove
(underside of table) from
the right
· it can be freely adjusted
over the whole width of
the table
Scale
· number “0” corresponds
to the centre needle
position
A
B
C
Important! (USA/Canada only)
This sewing machine has a polarized plug
(one blade wider than the other). To
reduce the risk of electric shock, this plug
is intended to fit only one way into a
polarized outlet. If the plug does not fit
fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified
electrician to install the proper outlet. Do
not modify the plug in any way.
BA_165_engl 16.4.2004 9:34 Uhr Seite 7
030787.52.04_0401_a165_EN
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina Artista 165 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina Artista 165 in the language / languages: English as an attachment in your email.

The manual is 11,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina Artista 165

Bernina Artista 165 User Manual - English - 40 pages

Bernina Artista 165 User Manual - German - 121 pages

Bernina Artista 165 Additional guide - Dutch - 40 pages

Bernina Artista 165 User Manual - Dutch - 122 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info