Setting up the sewing computer18
Threading the upper thread
Attaching the thread spool
•
raise the needle and presser foot
•
turn the power switch to «0» (off)
•
attach the foam pad
•
place spool on pin (spool turns clockwise)
•
attach the appropriate spool disc - diameter of spool disc is
disc size. There must be no clearance between the disc and
the spool
•
take thread through rear guide A
•
then into slit of upper thread tension
Down
•
pull thread down to the right of the take-up
cover to B
Up
•
take thread up to the left of the cover to C in the direction
of the arrow, placing it in the take-up level Refer to the safety
instruction!
C
D
E
B
A
Down
•
take thread down and through guides D and E
