8 Setting up the sewing computer
•
foot control
•
instruction manual
•
power cable
•
sewing table (only 230/240)
•
warranty card
•
Accessory box
•
presser foot lifter* (FHS)
(**220/230)
• fabric case for standard
accessories (only 220)
Accessories
Start-stop-unit**
With the Start-stop-unit (SSU)
the start-stop-function can be
controlled by hand.
•
press start-stop-button A =
stitching starts
•
with the speed regulator B
the sewing speed can be
regulated by hand
•
to interrupt or stop sewing =
press start-stop-button A
again
Note:
If the foot control is connec-
ted with the sewing compu-
ter, the Start-stop-unit is out
functions.
Standard accessories*:
4 bobbins (+ 1 in the capsule
in the sewing computer)
Selection of 130/705H needles
Seam ripper
Screwdriver
Angle key Torx
Lint brush
Seam guide
Compensating plate
3 spool discs
Foam pad
Oiler
Compensation plate for sewing
buttonholes
Fabric cover
•
protects from dust and dirt
•
compartment for accessories
Lens Set **
We recommend the use of the
BERNINA Lens Set for more
comfort when sewing.
Caution!
To avoid injury always attach
the protective cover of the
magnifying glass holder
when the magnifying glass is
not in use.
* can vary from country to country;
see presser foot selection p. 36
** available as a special accessory
CFL (** 220/230)
Contrary to an ordinary bulb,
the CFL sewing light has a better
illumination and a longer life.
Caution:
Please note that a defective
CFL sewing light must ONLY
be replaced by an authorized
technician. The sewing com-
puter must be brought to an
authorized BERNINA dealer!
A
B
Please refer to the safety
instructions!