614548
27
Zoom out
Zoom in
Previous page
1/276
Next page
26
Sewing preparation
Threading Double/Triple Needle
Changing the thread
cut the spool thread before the pre-tension and pull out of the sewing
computer in front of near the needle
Threading Double Needle
touch the «Security Program»-icon
touch the corresponding needle icon in the «Security Program»-Display
close the «Security Program»-Display
place a thread spool on the center spool pin and one on the rear spool pin
and thread the corresponding guides on the telescopic rod
insert the two threads together into the threading slit, guiding the thread of
the rear spool pin behind the thread-tension disc 1 while guiding the thread
of the center spool pin in front of the tension disc 1. Then guide the two
threads through the thread guide at the needle clamp
touch the «Manual Threading»-icon in the threading animation Display.
Next touch the illuminated automatic threading button
using the manual threader in your accessory kit, manually thread the left
needle and then the right needle
Triple Needle
touch the «Security Program»-icon
touch the icon of the triple needle in the «Security Program»-Display
place a thread spool on each spool pin and thread the respective guides on
the telescopic rod
thread as usual, guiding the thread from the rear and center spool pin in the
threading slit to the rear of thread tension disc 1 and the thread from the
front spool pin in front of the tension disc
Working with the Double needle
To achieve the best sewing quality:
Upper threads must be guided separately into the thread guide of the needle
clamp.
at that point, thread the first thread behind the wire as usual (red arrow),
thread the second thread in front of the wire (picture 2)
the recommended optimal speed for Double Needles ranges from about
350-500 stitches per minute. Set the slide speed control as shown below
(picture 3)
make sure that the threads are not twisted after the thread take-up lever.
For a better sight the cover can be removed
As a general guideline:
replace the needle before starting a new sewing project
Needles are wearing parts and by frequent use they change their features. Even
after 1.5 hours of useage first abrasions are recognizable. After about 8 hours,
increases in thread breakage, loops and poor stitch formation may occur.
1
1
2
3
034791.51.04_2014-02_Manual_B880_EN
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 880 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 880 in the language / languages: English as an attachment in your email.

The manual is 19,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 880

Bernina 880 User Manual - German - 276 pages

Bernina 880 User Manual - Dutch - 276 pages

Bernina 880 User Manual - French - 276 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info