614548
23
Zoom out
Zoom in
Previous page
1/276
Next page
22
Sewing preparation
Preparation
turn power switch on (to «I»)
place empty bobbin on Pin 1, white mark in front
the bobbin winding screen appears
the amount of bobbin fill is recognized by the system and displayed by a
bar above the selectable bobbin fill
place thread spool on the front spool pin 2 and thread the respective guides
3 on the telescope
Winding the Bobbin
hold thread with both hands, guide the thread in the thread guide on the
swivel plate 4 in the direction of the arrows and around the bobbin pre-
tension 5
wind the thread one to two times around the empty bobbin 6 following the
direction of the arrows and pull any excess thread in the direction of the
arrows, cut off on the thread cutter 7
select the bobbin filling, standard = 100%
touch the green «Start»-icon 8
adjust the winding speed via the «+»- or «-»-icon or the stitch width or stitch
length knob
winding process stops as soon as the selected fill percentage is reached
remove the bobbin and pull the thread over the thread cutter
the screen is closed
Winding the Bobbin
Interrupting the winding process
the winding process can be interrupted while winding by touching the
«Start»-icon 8 and the Display can be closed by touching the «Close»-icon
top right
It is possible to wind the bobbin while embroidering.
We recommend, however, to reduce the winding speed.
1
3
7
5
6
2
4
Continuing the winding process
touch the «bobbin»-icon 9
the winding Display opens
touch «Start» to start winding process
the winding process is continued
9
touch the «i»-icon in the bobbin winder Display
an animation how to wind the lower thread appears
Manual mode
touch the «man»-icon
the winder will run as long as the «Start»-icon is pressed
8
034791.51.04_2014-02_Manual_B880_EN
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 880 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 880 in the language / languages: English as an attachment in your email.

The manual is 19,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 880

Bernina 880 User Manual - German - 276 pages

Bernina 880 User Manual - Dutch - 276 pages

Bernina 880 User Manual - French - 276 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info