508644

Bernina 830 Manual

20
Zoom out
Zoom in
Previous page
1/216
Next page
20
Preparation
As a thread-guide eyelet (Fig. 1)
Use the unit without lubricator for a controlled guiding of the thread into the pretensioner, e.g. when using lively thread
types.
As a thread lubricator (Fig. 2)
Using the lubricator is advisable when using e.g. threads with high function values, metallic threads, loosely twisted
thread types etc. The silicone fluid improves the threads‘ gliding properties considerably and therefore helps to produce
flawless stitching results.
Assembly
► insert the unit into the spool-holder cover fixture and
push down entirely (Fig. 1)
Thread-Guide-and-Lubricating Unit
The silicone fluid must ONLY be used
for thread lubrication. Never use it to
lubricate the hook system!
► insert the lubricator into the holder on the left side of the
unit, taking care to place the lubricator in such way that
the openings for the thread are in line with the thread
flow or thread direction (Fig. 2)
► moisten the felt, add a few drops of silicone fluid
► place the thread spool onto the middle or rear spool pin
as usual. Then guide the thread through the respective
eyelet of the telescopic rod and the eyelet of the
thread-guide-and-lubricating unit
► hold the thread with both hands, pull it in to the slit of the
felt, pulling it down as far as it goes so that it‘ll stay in
the felt during machine operation (Fig. 3)
► continue and complete threading the sewing computer
as normal
► take care that the felt remains moistened. It mustn‘t dry
out. Apply some drops of silicone fluid once in a while to
keep it moist
When using the Thread-Guide-and-Lubrification Unit and
depending on the type of thread used it might be neces-
sary to reduce the upper-thread tension slightly to achieve
perfect stitching results,
► to remove the Thread-Guide-and-Lubrification Unit,
push the entire unit up
Reattach the Thread-Guide-and-Lubrification Unit. Thread
the sewing computer as usual, including the eyelet of the
unit (Fig. 2).
3
► during the initial threading of the sewing computer and
when the radial thread release is used it is advisable to
pull an extra inch of thread from the spool before the
threader button is pushed (Fig. 4)
4
1
2
032299.53.04_1204_B830_EN
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 830 in the language / languages: English as an attachment in your email.

The manual is 30,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 830

Bernina 830 User Manual - German - 216 pages

Bernina 830 User Manual - Dutch - 216 pages

Bernina 830 User Manual - French - 216 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info