508645
112
Zoom out
Zoom in
Previous page
1/148
Next page
112
BSR
Activating the BSR Sewing Function:
1. With the Foot Control
plug in the foot control
lower the presser foot
start the BSR mode by pressing the foot control
a red light appears on the presser foot
the foot control must be pressed continuously during
sewing
the speed of the sewing computer will be regulated by
the movement of the fabric
by releasing the foot control the BSR mode stops
2. With the Start/Stop Button
lower the presser foot
start the BSR mode by pressing the Start/Stop Button
a red light appears on the presser foot
the speed of the sewing computer is regulated by the
movement of the fabric
by re-pressing the Start/Stop Button the BSR mode
stops
Deactivating the BSR Sewing Function
by using the Start/Stop Button
Mode 1:
if the fabric is not moved for approx. 7 seconds, the
BSR mode is deactived and the red light on the presser
foot goes off
Holding the Work
hold and guide the taut fabric with both hands
abrupt movements of the fabric (slowing down, speed-
ing up respectively) can result in slightly too short or too
long stiches
continuous movement of the fabric (no abrupt move-
ments) under the foot will provide best results
move the fabric in one direction for best results
Application Example:
BSR With Zigzag Stitch no. 2
the zigzag stitch can be used for thread painting or
fabric embellishment for example
areas can be filled and forms or pictures created
BSR Function Deactivation
pull out the plug of the BSR presser foot connection
cable on the sewing computer. The straight stitch no. 1
is active
remove the BSR foot
Mode 2:
if the stitching process is ended by no longer moving the
fabric, one additional stitch is made depending on the
needle position. The sewing computer always stops with
the needle up, even if the arrow on the display points
down
032298.53.04_1204_B820_EN
112


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 820 in the language / languages: English as an attachment in your email.

The manual is 27,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 820

Bernina 820 User Manual - German - 216 pages

Bernina 820 User Manual - Dutch - 148 pages

Bernina 820 User Manual - French - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info