508645
98
Zoom out
Zoom in
Previous page
1/148
Next page
98
Practical Applications
Inserting
Zippers
Preparation
select the icon showing the attached presser foot in the
presser foot selection (refer to p. 56)
baste seam closed and clean finish the seam allowance
baste or pin zipper in place so that fabric folded edges
meet over the center of the zipper
With Straight Stitch no. 1
open zipper a little
start sewing from top left
position the foot so the needle stitches along the edge
of the zipper coils
stop in front of the pull (needle position down), raise the
presser foot and close zipper again
continue to sew to the base of the zipper (needle
position down)
turn fabric and sew across the seam (needle position
down)
turn fabric again and sew second side of the zipper from
bottom to top
Variation
Sew both sides of Zipper from bottom to top
suitable for all fabrics with nap or grain (e.g. velvet)
prepare zipper as described above
start sewing in the seam of the zipper end and sew first
side from bottom to top
sew the second side the same way from bottom to top
Zipper foot no. 4D
Zipper foot with guide no. 14 (optional
accessory)
Zipper as a decorative element
sew a visible zipper into the fabric as a
decorative element
To sew around the zipper pull
close the zipper and sew up to about
2” (5cm) away from the pull
stop with the needle down in the fabric,
raise the presser foot. Open zipper, pulling
the tab below the needle; lower presser
foot and continue to sew
Starting to sew
hold threads firmly when starting to sew
and pull the fabric gently behind the needle
for a few stitches
Zipper tape or firm fabric
for even stitch formation use a size
90 - 100 needle
032298.53.04_1204_B820_EN
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 820 in the language / languages: English as an attachment in your email.

The manual is 27,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 820

Bernina 820 User Manual - German - 216 pages

Bernina 820 User Manual - Dutch - 148 pages

Bernina 820 User Manual - French - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info