508645
70
Zoom out
Zoom in
Previous page
1/148
Next page
70
Buttonholes
Balance
A
B
Balance for Direct Entry Length Standard Buttonhole
balance alterations have the same effect on both beads
Balance for Manual Keyhole or Round Buttonhole
Balance alterations affect the two beads differently:
If left bead too dense (picture A):
turn the stitch length knob counterclockwise = left bead will be longer, right bead
gets shorter
If left bead not dense enough (picture B):
turn stitch length knob clockwise = left bead will be shorter, right bead will be longer
the keyhole or eye is balanced as follows:
If keyhole is distorted to the right (picture C):
turn the stitch length knob clockwise
If keyhole is distorted to the left (picture D):
turn the stitch length knob counterclockwise
Balance for Manual Standard Buttonhole
balance alterations have the same effect on both beads
Balance for Direct Entry Length Keyhole or Round Buttonhole
balance alterations have the same effect on both beads
the keyhole or eye is balanced as follows:
straight stitch until the sewing computer changes to the keyhole or eye, then stop
sewing
touch the «Balance» icon and adjust the picture in the right portion of the Balance
screen with the stitch length knob to match the sewn buttonhole
If keyhole is distorted to the right (picture C):
turn stitch length knob counterclockwise
If keyhole is distorted to the left (picture D):
turn stitch length knob clockwise
touch and complete buttonhole
Balance for Stitch Counter Buttonhole
balance alterations have a different effect on both beads (see picture for manual
buttonhole)
re-program the buttonhole after each alteration in balance
C D
In all Direct Entry length and manual button-
holes each individual buttonhole sequence
can be balanced separately.
In stitch counter buttonholes the balance
affects both beads differently (left and right):
when altering the bead the keyhole or eye
are automatically altered accordingly.
Clear Balance
touch the «Reset» icon in the special Balance screen or
press the «clr» button («clr» also deletes the program-
med buttonhole!)
Recommendation
sew a test buttonhole on a piece of the original fabric
032298.53.04_1204_B820_EN
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 820 in the language / languages: English as an attachment in your email.

The manual is 27,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 820

Bernina 820 User Manual - German - 216 pages

Bernina 820 User Manual - Dutch - 148 pages

Bernina 820 User Manual - French - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info