508645
39
Zoom out
Zoom in
Previous page
1/148
Next page
39
Setup Program
Needle Stop Adjustment
if the automatic thread cutter and the «raise presser
foot» function are switched off when securing, the
needle stop position 7 can be selected
standard = sewing computer stops with the needle up
while the presser foot stays down after securing
touch «Needle down» icon
the sewing computer stops with the needle down after
securing
Automatic Thread Cutter and Securing
Stitches
the number and type of securing stitches before the
thread is cut can be programmed
touch function 8 for securing stitches in place or function
9 for forward securing stitches
two to six securing stitches can be programmed
standard = no securing stitches programmed
Presser foot position when needle stop
down
with activated icon 1, the presser foot remains down
when the sewing computer stops
with activated icon 2, the presser foot is raised enough
to pivot the fabric (hover position)
with activated icon 3, the presser foot is raised into its
highest position
Hover position of presser foot
the stitch width and stitch length multi-function knobs
can be used to set the clearance from 0mm to 7mm in
maximum (standard clearance is 2mm)
the set value, i.e. the clearance between the fabric and
the presser foot, is displayed in icon 4
8 9
7
1 2 3
4
032298.53.04_1204_B820_EN
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 820 in the language / languages: English as an attachment in your email.

The manual is 27,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 820

Bernina 820 User Manual - German - 216 pages

Bernina 820 User Manual - Dutch - 148 pages

Bernina 820 User Manual - French - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info