Manual Bernina 820 (page 20 of 148) (English)

508645

Zoom out

Zoom in

1/148

Preparation

As a thread-guide eyelet (Fig. 1)

Use the unit without lubricator for a controlled guiding of the thread into the pretensioner, e.g. when using lively thread

types.

As a thread lubricator (Fig. 2)

Using the lubricator is advisable when using e.g. threads with high function values, metallic threads, loosely twisted

thread types etc. The silicone fluid improves the threads‘ gliding properties considerably and therefore helps to produce

flawless stitching results.

Assembly

► insert the unit into the spool-holder cover fixture and

push down entirely (Fig. 1)

Thread-Guide-and-Lubricating Unit

The silicone fluid must ONLY be used

for thread lubrication. Never use it to

lubricate the hook system!

► insert the lubricator into the holder on the left side of the

unit, taking care to place the lubricator in such way that

the openings for the thread are in line with the thread

flow or thread direction (Fig. 2)

► moisten the felt, add a few drops of silicone fluid

► place the thread spool onto the middle or rear spool pin

as usual. Then guide the thread through the respective

eyelet of the telescopic rod and the eyelet of the

thread-guide-and-lubricating unit

► hold the thread with both hands, pull it in to the slit of the

felt, pulling it down as far as it goes so that it‘ll stay in

the felt during machine operation (Fig. 3)

► continue and complete threading the sewing computer

as normal

► take care that the felt remains moistened. It mustn‘t dry

out. Apply some drops of silicone fluid once in a while to

keep it moist

When using the Thread-Guide-and-Lubrification Unit and

depending on the type of thread used it might be neces-

sary to reduce the upper-thread tension slightly to achieve

perfect stitching results,

► to remove the Thread-Guide-and-Lubrification Unit,

push the entire unit up

Reattach the Thread-Guide-and-Lubrification Unit. Thread

the sewing computer as usual, including the eyelet of the

unit (Fig. 2).

► during the initial threading of the sewing computer and

when the radial thread release is used it is advisable to

pull an extra inch of thread from the spool before the

threader button is pushed (Fig. 4)

032298.53.04_1204_B820_EN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 820 in the language / languages: English as an attachment in your email.

The manual is 27,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 820

Bernina 820 User Manual - German - 216 pages

Bernina 820 User Manual - Dutch - 148 pages

Bernina 820 User Manual - French - 148 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bernina 820 Manual

Product: