508645
16
Zoom out
Zoom in
Previous page
1/148
Next page
16
Preparation
Removing/Inserting the Bobbin
Removing the Bobbin
open bobbin cover, the hook system swings to the front
push the latch in the center of the bobbin to the left, the
bobbin pops out and can be removed
Inserting the Bobbin
with bobbin markings facing the front, place the bobbin
into the hook and push until it clicks into place
Threading Lower Thread
pull the thread to the right into slit A, then left under the
spring
pull thread over thread cutter B and cut
close the bobbin cover slowly, the hook swings back to
the rear
A
B
Only remove the bobbin if the hook is at
the end position (threading position).
It is not necessary to bring the bobbin thread
up through the hole in the stitch plate as the
loose end is just the right length to start sewing.
Check the threading path
After threading the hook, hold the mirror under the
swung-out hook unit as shown in the pictures below.
Position of bobbin thread when threaded for sewing
032298.53.04_1204_B820_EN
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 820 in the language / languages: English as an attachment in your email.

The manual is 27,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 820

Bernina 820 User Manual - German - 216 pages

Bernina 820 User Manual - Dutch - 148 pages

Bernina 820 User Manual - French - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info