508643

Bernina 800DL Manual

10
Zoom out
Zoom in
Previous page
1/40
Next page
9
Preparing the machine / Preparación de la máquina
Maschine bereitstellen / Préparation de la machine
Attaching the foot control
Plug foot control into the machine socket (A) and then into the main socket (B). The foot
control regulates the sewing speed. The sewing speed can be adjusted by increasing or
decreasing the pressure on the foot control.
Conexión del pedal de mando
Enchufar el pedal de mando en la máquina de coser (A) y seguidamente enchufar el
enchufe en la red eléctrica (B).
Apretando más o menos el pedal de mando puede regularse la velocidad de la costura.
Fussanlasser anschliessen
Fussanlasser in Nähmaschinensteckdose stecken (A) und anschliessend den Netzstecker
mit der Netzsteckdose (B) verbinden. Durch mehr oder weniger Druck auf die Trittfläche
des Fussanlassers kann die Nähgeschwindigkeit verändert werden.
Branchement de la pédale de commande
Brancher la pédale dans la prise de la machine à coudre (A), puis relier la prise au réseau
(B). La vitesse de couture peut être modifiée en appuyant plus ou moins sur la pédale de
commande.
“WARNING”!
This appliance has a polarised plug (one blade wider than the other). To reduce the risk of electrical shock,
this plug is intended to fit into a polarised main socket only one way. If the plug does not fit fully in the
polarised main socket, reverse the plug. If it still does not fit, contact a qualified electrician to install the
proper polarised main socket. Do not modify the plug in any way.(for USA, Canada only).
*
Use only the foot control model YC-482 (USA, Canada), YC-483N (220-240V).
Thread stand
Push the support rod firmly into the socket on the back of the machine. Raise the support
rod (C) fully, turning slightly until the position catches engage. Position the thread guide(D)
on the thread stand so that the arrow is to the front.
Guía-hilo
Estirar completamente el soporte telescópico del guía-hilo y girarlo ligeramente hasta que
se enganche en la posición correspondiente (C). Inserir el guía-hilo en el soporte telescópico
(D) de manera que la flecha mire hacia adelante.
Garnrollenständer
Den Fadenführungsstab bis zum Anschlag ausziehen, drehen, bis er bei den
entsprechenden Positionen einrastet (C). Die Fadenführung auf den Fadenführungsstab
(D) stecken, so dass der Pfeil nach vorne zeigt.
Support de broches à bobines
Retirer le support de guide-fil jusqu’en butée, tourner jusqu’à ce qu’il s’encliquette dans la
position correspondante (C). Embrocher le guide-fil sur le support de guide-fil (D) de sorte
que la flèche soit orientée vers l’avant.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 800DL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 800DL in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 8,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info