489141
95
Zoom out
Zoom in
Previous page
1/194
Next page
94
BSR
Quilting with BSR (optional accessory)
BSR-Function
The BSR presser foot reacts to the movement of the fabric under the foot and
controls the speed of the sewing computer up to the maximum speed possible.
The following applies: the faster the fabric is moved, the higher the speed of
the sewing computer.
If the fabric is moved too fast, an accoustic signal (beep sound) is heard, if the
Beeper is activated (see page 97).
BSR function with straight stitch No. 1
This function using the BSR presser foot, allows for free-motion quilting
(sewing) using the straight stitch and a pre-selected stitch length up to 4mm.
The regulated set stitch length is maintained within a certain speed, indepen-
dent of the movement of the fabric.
BSR function with zig-zag No. 2
The zig-zag can be used e.g. for thread painting. The set stitch length will not
be maintained when sewing with the zigzag stitch, but the BSR function
simplifies the application.
There are two different BSR modes
̶ BSR 1-Mode is the active standard
̶ the sewing computer runs continuously at a reduced motor speed, as soon
as the foot control or the «Start/Stop»-button is pressed
̶ the speed of the sewing computer is regulated by the movement of the
fabric
̶ through continuous needle movement, securing in the same position is
possible without pressing an additional button
̶ BSR 2-Mode is activated by selecting the BSR 2-icon in the BSR-display
̶ the sewing computer will only engage if the foot control or the «Start/
Stop»-button is pressed and the fabric is moved simultaneously
̶ the speed of the sewing computer is regulated by the movement of the
fabric
̶ to secure press the «Securing function»-button
̶ by selecting the BSR 1-icon in the BSR-display Mode 1 is activated
ATTENTION!
As long as the BSR presser foot is illuminated red, adjustments
like threading and changing the needle, for example, must not
be carried out, as the needle will engage while fabric is moved
unintentionally! Without fabric feed the BSR mode is turned off
after approx. 7 seconds and the red light goes off.
Please refer to Safety Instructions!
By activating the BSR function the sewing computer sews
either continuously at reduced speed (mode 1, standard), or as
soon as the fabric is moved (mode 2).
033527.53.04_2014-07_Manual_B580_EN
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 580 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 580 in the language / languages: English as an attachment in your email.

The manual is 17,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 580

Bernina 580 User Manual - German - 194 pages

Bernina 580 User Manual - Dutch - 190 pages

Bernina 580 User Manual - French - 194 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info