489141
67
Zoom out
Zoom in
Previous page
1/194
Next page
66
Practical stitches
Reinforced darning, automatic
Buttonhole foot No. 3A
Reinforced darning program No. 23
Quick darning of holes or worn areas
Replaces threads along the lengthwise grain in all materials.
Preparation
hoop light weight materials in the darning hoop (optional accessory)
the darning area stays evenly taut and cannot be distorted
Darning with the buttonhole foot No. 3A
Insert the needle in the top left of the worn area.
sew first row
press «Quick reverse»-button
the length is programmed
finish sewing the darning program
the sewing computer stops automatically
press the «clr»-button
the programmed settings are cleared
If the darning does not cover the whole worn or damaged area
Reposition the work under the foot to continue covering the worn or
damaged area. Begin sewing; the program will repeat as often as
desired (the length is saved).
Per «Direct entry length» (see page 32) a darning length up to
30mm can be programmed.
Reverse pattern foot No. 1C
Zig-zag No. 2
̶ for all fabrics
̶ for finishing raw edges
̶ elastic seams
̶ decorative sewing
Finishing edges
guide edge of fabric into the center of the presser foot
do not select too wide a stitch
do not select too long a stitch
needle goes into fabric on one side and over the edge into the air on the
other side
̶ the edge of the fabric should lie flat and not roll
̶ use darning thread for fine materials
Satin stitch
̶ dense, short zig-zag (stitch length 0.5-0.7mm)
̶ use satin stitch for appliqué, embroidery, etc
Finishing edges
As a variation the satin stitch No. 1354 can be used.
033527.53.04_2014-07_Manual_B580_EN
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 580 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 580 in the language / languages: English as an attachment in your email.

The manual is 17,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 580

Bernina 580 User Manual - German - 194 pages

Bernina 580 User Manual - Dutch - 190 pages

Bernina 580 User Manual - French - 194 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info