489141
31
Zoom out
Zoom in
Previous page
1/194
Next page
30
C
F
J
D E
G H
I
K L
N O
M
Functions
A Needle stop up/down
B Pattern begin
C Securing
D Pattern repeat
E Upper thread tension
F Needle position
G Mirror Image (Left/Right)
H To alter pattern length/stitch density
I Security program
J Long stitch
K Mirror image (Up/Down)
L Presser foot indicator
M Permanent reverse sewing
N Balance
O Presser foot pressure
Overview Sewing functions
touch «i»-icon
function Display appears
Needle stop up/down
touch icon
the arrow on the Display points down
the sewing computer stops with needle down
touch the icon again
the arrow on the Display points up
the sewing computer stops with needle up
Pattern begin
̶ the function appears when the sewing computer is
stopped while sewing a single stitch or a stitch
combination
the needle moves to the beginning of a stitch
pattern or program
Securing
touch icon before sewing
the single stitch is secured with four securing
stitches at the beginning
touch icon while sewing a single pattern
the single stitch is secured at the end
the sewing computer stops
to program the securing function within a stitch
combination
any single stitch of the combination can be secured
at the begin or at the end
Pattern repeat
touch icon 1x
number 1 appears: the sewing computer stops at
the end of a single stitch or a stitch combination
touch icon 2-9x
numbers 2-9 appear: the sewing computer stops
after the selected repeats of single stitches or a
stitch combination
Upper thread tension
change upper thread tension
the respective value is visible in the icon
Overview Display
Information
touch icon
another Display is opened
Back
touch icon
goes back to the previous Display
all changes are saved
Confirm selection
touch icon
activates or confirms alteration/selection
Leaving the active Display
touch icon
the Display is closed
goes back to the previous Display
General functions
B
A
Needle stop position up and «Quick Reverse»-
button
If the «Quick Reverse»-button is pressed while sewing
or after stopping (e.g. zig-zag) with programmed needle
stop up, the sewing computer sews one stitch forward
before it switches to sewing in reverse.
Needle stop position down and «Quick Reverse»-
button
If the «Quick Reverse»-button is pressed after stopping
(e.g. zig-zag) with programmed needle stop down, the
sewing computer switches to sewing in reverse immedi-
ately.
033527.53.04_2014-07_Manual_B580_EN
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 580 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 580 in the language / languages: English as an attachment in your email.

The manual is 17,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 580

Bernina 580 User Manual - German - 194 pages

Bernina 580 User Manual - Dutch - 190 pages

Bernina 580 User Manual - French - 194 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info