458369
68
Zoom out
Zoom in
Previous page
1/94
Next page
67
BSR
For an even sewing start (the first stitch) the foot control must be
pressed and the fabric moved simultaneously. This also applies for
sewing points and straight stitching within a round form.
When resuming work with the BSR presser foot after exiting the
function, the BSR mode that was active at the time of exiting the
BSR function will be activated, even if the sewing computer was
turned off in the meantime.
When exeeding a certain speed, adhering to regular stitch length
cannot be guaranteed.
Make sure that the lens on the bottom of the BSR foot is clean (no
fingerprints, etc.). Clean lens periodically with soft, slightly damp
cloth.
Preparation
lower the feed dog
presser foot pressure may be reduced depending on the material type and
thickness
use slide-on table
use the Free Hand System
attach the BSR presser foot to the sewing computer
plug the cable in the outlet provided
set the desired stitch length
̶ the basic stitch length is 2 mm
̶ when sewing small forms and stipplings, stitch length of 1-1.5 mm is
suggested
BSR-Display is opened automatically
straight stitch is activated
BSR 1 mode is engaged
select the zig-zag or the straight stitch again by pressing the «Direct
Selection»-button
Removing the presser foot sole
press both buttons together
slide the sole downwards out of the groove
Attaching the presser foot sole
slide the desired sole up in the groove until it clicks into its place
033471.52.04_2014-02_Manual_B530_550_EN
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 530 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 530 in the language / languages: English as an attachment in your email.

The manual is 12,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 530

Bernina 530 User Manual - German - 94 pages

Bernina 530 User Manual - Dutch - 90 pages

Bernina 530 User Manual - French - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info