458369
53
Zoom out
Zoom in
Previous page
1/94
Next page
52
Buttonholes
1 Marking the length of manual buttonholes
mark the buttonhole length in the desired position
use buttonhole foot/sole No. 3 */**
2 Marking the length of automatic buttonholes
mark the length of just one buttonhole
after sewing the first buttonhole, the length for all subsequent buttonholes is
automatically programmed
mark only the beginning of all subsequent buttonholes
use automatic buttonhole foot with slide No. 3A
3 Marking the length of keyhole buttonholes
mark the bead length only
the correct length eye will be added when the buttonhole is sewn
after sewing the first buttonhole, the length for all subsequent buttonholes is
automatically programmed
mark only the beginning of all subsequent buttonholes
use automatic buttonhole foot with slide No. 3A
Test-sewing
always sew a test sample on the original fabric and
with stabilizer you intend to use
select the buttonhole type you intend to use
sew the buttonhole in the same direction on the fabric (horizontal or vertical,
with or against the grain)
cut the buttonhole open
push the button through
adjust the buttonhole length if necessary
To adjust the bead width
alter the stitch width
Altering stitch length
Stitch length adjustments affect both buttonhole beads.
spacing between the stitches
After stitch length alteration.
re-program the buttonhole
If a buttonhole is to be sewn at right angles
to the seam, we recommend the use of the
height compensation plates (optional
accessory). Place the plates from the back
between fabric and bottom of slide foot up to
the thick part of the fabric and push to front.
When sewing a buttonhole in difficult
materials, we recommend to use the
Compensation plate for buttonholes
(optional accessory). It can be used along
with buttonhole foot with slide No. 3A.
3
1 2
Thread tension for sewing buttonholes
thread the bobbin thread through the finger A of the bobbin case
the bobbin thread tension is a little tighter
this gives the beads on the right side of the fabric a slightly rounded
appearance
A
An additional cord reinforces buttonholes and enhances their
appearance (see page 54).
033471.52.04_2014-02_Manual_B530_550_EN
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 530 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 530 in the language / languages: English as an attachment in your email.

The manual is 12,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 530

Bernina 530 User Manual - German - 94 pages

Bernina 530 User Manual - Dutch - 90 pages

Bernina 530 User Manual - French - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info