453301
15
Zoom out
Zoom in
Previous page
1/52
Next page
14
Preparation - Sewing
Threading the Upper Thread
Attaching the thread spool
raise the needle and presser foot
power switch to «0» (off)
place foam pad on pin base
place spool on pin (thread unwinds clockwise)
attach appropriate spool disc - diameter of spool determines disc size, there
must be no clearance between the disc and the spool
take thread through rear guide A
then into slit of upper thread tension B
pull thread down to the right of the take-up cover and around C
take thread up to the left of the cover and around D, placing it in the
take-up lever
take thread down and through guides E and F
Needle Threader
1 Press lever down
raise needle
lower the presser foot
hold thread to the left and back
press lever A down and simultaneously guide the thread around hook B to
the right to the needle
2 Guide thread to front of the needle
put the thread from the front into the guide C until it catches in the wire
hook
3 Release lever and thread
release lever A and thread
put the thread under the foot and pull the thread backwards or
put the thread under the foot and pull it from front to back over the thread
cutter on left side of the head frame
B
A
A
1
3
B
A
C
D
E
F
C
2
033301.71.04_2014-02_Manual_B330_B350_PE_B380_EN
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 330 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 330 in the language / languages: English as an attachment in your email.

The manual is 8,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 330

Bernina 330 User Manual - German - 53 pages

Bernina 330 User Manual - Dutch - 50 pages

Bernina 330 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info